Recent content by awpsome

Anyone in the bay area got a TC UCA Uniball removal tool? Shown here: TOTAL CHAOS FABRICATION Need to do some maintenance and this would help make the install easier if I could borrow for a day?

super lube based on your recommendation although previously used red grease and feel like the red grease has longer regrease intervals over the super lube tri flow dry lube as recommended as well for the uniball although that seems to thicken quite easily in 40 degree weather

Thanks for the data point! Interesting to hear how well the performed for you. Backs up the response im reading about people with KM2s that its not all that bad. And its finally nice to hear someone with KM3s give their feedback for snow/ice use. Thanks!

damn all these comments about MTs being a terrible idea in snow definitely got my worried. I cant seem to find anything about KM3s in snow/ice but there is a decent amount of feedback from folks with KM2s that are reporting decent traction. I might just make the change to KO2s for a better...

Appreciate the response! Definitely going to get some practice in. Gotta start somewhere..

is the general consensus that i should be able to drive on well maintained roads with KM3s? Want to be able to take the family to tahoe this coming season.

Well i already own the KM3s actually just want to make sure before i head up i am prepared as much as i can be. Since buying a separate set of tires for a few times of use for snow/ice driving isnt ideal. I am hopefully the KM3s will be alright and maybe at most buy some chains for the rear...

Interesting! Thanks for the feedback everyone. Yea its my first year with the KM3s and wanted to do a board trip but want to make sure i keep the family safe as ive never driven on snow before. I originally bought the KM3s as it fits my 95% year around type of terrain here and figured not...

Now that the snow season is starting to hit for some of us, I've been curious to get the opinions of KM3 owners around snow/ice use? Any feedback would be appreciated!

LCA Bolts. 100% Happened to me, figured it out randomly and all similar symptoms. Your welcome. :)

Here is what it looks like i need to put together: and #2 in here:

LOL I live in hawaii and yes im a local..

I did that the first time around. Took off the rotor, caliper, shoes, everything cleaned it all up and buttoned it back together. Started instantly making the same noise again once i started to drive it. I definitely see run out visually with my own eyes when spinning the rotor on its own. I...

I am highly doubting the housing is bent too. From what i can tell, its most likely the flange or the axle shaft itself. Haha; i was out on the trails and needed to climb a wet high incline right bank turn. Had to gun it a bit, slid into a hole and feel like i smashed the right rear on/in that...

Anyone else bend their rear axle on a trail before? Truck still drives fine, nothing major. But i do have a creaking noise that happens any time i push the brakes. Driving me nuts, so i want to go ahead and get this fixed. Dealership wants $1800.. i looked up axle and wheel bearing assembly...