Recent content by Benzoil04

I am gonna be replacing the fuel pump in my 97 3.4 later this week. Went to fire it up and crank, but no start. Currently sitting in my gravel driveway. I was successful yesterday siphoning out about 8 gallons of gas. I used 3/8 hose, tip cut at a 45 degree angle. Had to twist and push a bit...

How much lift do you have and are you running any spacers? I have the same wheels sitting around and don't have any fender flares. Currently have 16x8 aftermarket wheels with 265/75r16s. I bashed in the pinch welds to get them not to rub. Have 5100s with ome 881s, set to first notch. Wondering...

Oh and BTW, I did call George at Max bore. I explained to him what was going on and that I was doing this washer mod and removed the linkage from the throttle body. He told me he never removes that portion when he is working on a throttle body and that I might have compromised it now to where...

Yeah guys I did find where to hook that spring back up. It was actually kind of a bugger and I had to slightly bend the end of it in order to get it hooked back up but it's where it belongs I'm sure of it. I have the thin fender washer installed. Tried starting it again and same thing. Wide...

Yeah before I saw your reply I went ahead and gave it a go. Hooked the cables back up and had it the way I thought it should go started it up and it was wide open. RPMs instantly was climbing up to 5,000 or so so I shut it down. I took it back apart and took the washer out and put it back...

Oh and I'm sorry I forgot to mention. I have a 1997 3.4 l with the 5-speed manual. So just throttle cable and cruise control cable. The cruise control spring is the way it should be but the other spring for the throttle is hanging loose on the one end. If that makes any sense.

Hey guys I just joined the site here. I have lurked for a little while but I am having an issue. Im doing this washer mod and when I popped the linkage free from the throttle body the little throttle spring came unhooked from its keeper. I'm not sure how the one end hooks back up. I believe in...