Recent content by BrianK14

  1. B

    Bellcrank bolt snapped off

    Might be easier to get a bell Crank parts kit from AutoZone or Oreillys and just replace the bell cranks. No messing with the easy out and breaking it off, no extra trips to the hardware store trying to find the right bolts. Probably about $30.
  2. B

    Rear brake backing plates rusted.

    Yes, you need an elocker housing, unless you want to spend a lot of time modifying a standard housing to work. When my original housing started leaking, I bought a rust free elocker housing, drum to drum, but no third member, on this site for $225. Did a elocker conversion and got rid of a lot...
  3. B

    Rear brake backing plates rusted.

    If the backing plates are rusted significantly, chances are the axle housing is as well. If your going all out, you may consider finding a rust free rear end housing from a salvage yard, EBay, etc, including axles/backing plates. Might not be much more than just new backing plates from Toyota
  4. B

    Need some expert input on this axle bearing job

    I have a pair of good condition OEM axles I’ll sell you for cheap. Send me a PM if interested.
  5. B

    Brakes Sticking

    Wheel speed sensor problem
  6. B

    Fog light hardware ID

    Honestly doubt that’s available separately.
  7. B

    02 Sport:Brake saga continues...now they beep as well as lurch. Help appreciated

    Sounds like your issue is likely due to a malfunctioning wheel speed sensor. Dirty, improperly seated, or going bad. At very low speed, an all ready weak signal from the wheel speed sensors tells the abs computer that wheel is locked, so it pulses the brakes. Pull your ABS codes, that may point...
  8. B

    Strong smell of gas - need a 4runner surgeon

    What Brillo said. My gas smell turned out to be a rusted and broken evap hardline
  9. B

    Spare tire question 16-17’’

    My 265/70/17 in a tundra split 5 spoke wheel fits fine. And, it replaced a 20yo original spare that I didn't trust to hold together on the road
  10. B

    LCA Poly Bushing Video - Is This Normal?

    The cam bolts/sleeves fit much tighter than that in my white line bushings.
  11. B

    2000 Four Runner with 49900 miles

    U should throw up some Pics and an asking price here. Someone may see the value.
  12. B

    VSC OFF, VSC TRAC lights on, no CEL, no codes

    Doesn't sound like the LEDs are your issue. Did you pull ABS codes yet? Pulling and resetting ABS codes
  13. B

    VSC OFF, VSC TRAC lights on, no CEL, no codes

    I don't think its all of the dash bulbs that are a problem. Just the ones for the gear select indicator lights can't be LED's
  14. B

    VSC OFF, VSC TRAC lights on, no CEL, no codes

    Yep, that’s the one. I don’t remember the details of jumpering and reading the flashes on the dash lights. But you can search, and should find plenty of info here. Also search led dash lights and VSC light on.

Members online

No members online now.

Forum statistics

Threads
278,309
Messages
3,554,071
Members
248,016
Latest member
Advally Service
Back
Top