Recent content by bsab5

I have the TRD Pro rims running stock tire size 265/70/17s BF Goodrich KO2s. With these I had to push back the fender liners and make a new mounting hole about 1/2 inch back due to rubbing at full lock in reverse. No trimming required.

I was new to 4Runners last year. I originally purchased an SR5 Premium but ended up getting rid of it and purchasing a Limited model. For the SR5 I had already purchased the TRD Pro skid plate, but on a Limited you can't see the skid plate because of how far down the front bumper hangs. So more...

Sorry for taking so long to respond. I believe I have the same clearance as the standard SR5 models because as you mentioned the crash bar is in the same place on both vehicles and the way I trimmed it I'm as far down as you can chop without exposing the crash bar. I might actually have a little...

Finished my chop and also worked on de-chroming over the weekend. For the chop I chose a line that was not too aggressive. Starting from the fender I drew a line ~1/2 inch below the 2nd lowest fender bolt. I came down at a slight angle to completely remove the lower chrome on the bottom side...

Hey tm965, curious if you can explain what you did with the bottom of the bumper after you trimmed it? Did you just leave it hanging or did you re-secure it? 03_4x4Runner mentioned constructing a few brackets. If you did create new brackets, how many did you use? If you didn't create brackets do...

Thanks Decipher. I'm going to try it out myself, without taking everything apart. I'll post a couple pics once I'm done.

Hey Magnetic4R, I just purchased a 2018 Limited. I have been searching all over trying to figure out the best way to black out the chrome pieces like you did. I also purchased those Raptor letters and ready to install. First, how did you mount the Raptor letters and did the mounting hold up...