Recent content by chips2002

To The Top [/URL]~original[/IMG]

Hi, I'm looking for a hitch (class III/IV) for 4th generation. Please IM or post if you have any available. I'm located in VA area. Thx!

I just changed my oil on the GX470. I found that the Purolator L30001, which is an equivalent of the Wix 51515, was too tall and wide. It was hitting the sway bar and a air conditioning compressor hose. I loosened the sway bar and moved the hose to make it fit eventually but decided it may...

The radio usually has a fuse on the back. You would have to remove the radio and check that the fuse has not blown. Before you do that, there is another fuse near the engine compartment or inside underneath the steering column.

Hello, Looking for an OEM tow hitch (5000 Ibs) for 4th Gen 4Runner. Let me know if you have one available. Thanks!

Hello, I'm looking for a set of OEM FJ Cruiser 4x4 front and rear coil springs. Please PM if you have any available. Thanks!

Hello, I'm looking for a set of OEM FJ Cruiser 4x4 coil springs front and back. Please PM if you have a set available. Thanks!

Thanks for your response! This is the answer I was looking for. You confirmed my research. I also agree about the metal to metal contact. I will have to cut a portion of the OEM coil isolators/bump stops if I decide to use these with the Airlift. I'm going to go as planned with the caster...

Above is what I have compiled from the search from various forums. Seems like the full setup with the top wheel caster, no isolators, and Airlift has not been fully executed. I wanted to get some opinions on this setup. Thanks will into the rear air spring to coil swap!

Hello, I own a 2004 Lexus GX470 V8 AWD and am having problems with the rear airbags functioning. I am looking to do a FJ Cruiser Bilstein 5100 strut/spring swap and add Airlift 1000 Airbags. I see lots of you guys doing this modification. I wanted to ask a few questions and confirm before...

How much did you buys pay for the HF jacks (2/4 ton)? I have been meaning to get a set. HF always has sales and 20-25% coupons you can use. Anybody use the Arcan jack from Costco? Any issues with any of these jacks. Heard they squeal and leak sooner or later. Thanks!

Do you get any check engine light? Do you burn any oil afterwards? I would do a compression check to ensure engine is getting adequate compression.

Didn't know there was a delete kit. Always learn something new while visiting this forum. Thanks!

It depends what you want do with the vehicle. While the 4 Runner is a reliable vehicles, cars depreciate year by year. I would keep the modifications relatively light and try to find parts on the forum. That way you can part out aftermarket parts when you decide to sell the vehicle to recoup...