Recent content by Cnellis80

Slicing and dicing was not my idea LOL! I'm game to chase this down with some guidance. I've looked at many EWDs and the one for my 4runner is by far the most confusing.

For testing sake, DRLs have not been deleted. I originally clipped the B-Y wire. I did this years ago and never had any issues with them until the latest $hit$how. Upon hooking the B-Y wire backup on the DRL module, I do get the bright indicator light on the dash when I pull that stalk toward me...

You can hear the clicking sound behind the glovebox when stalk is pulled toward you calling for brights to flash, but not when pushed forward to turn the brights on. Headlight relay is working, dimmer relay is the one not getting ground on the coil side. Combo switch inside tests good, even have...

Yes, when manually grounded I had all lights working. Could not consistently get the same result though. Tried with stalk on, grounding relay manually lights would work, but when I would try the same exact test later, then they wouldn’t. For now we have the relays jumped out and headlights...

Power is being supplied to the relay but its ground signal is not there on the coil side. Therefore the relay will not energize and no power being sent to the headlight sockets. Relay responds as it should when given ground manually.

Yes, I searched using numerous different terms. Yes, I read any threads that had symptoms similar to what I am dealing with even if all criteria wasn't met. I lurk and read on this forum a lot, just don't post or comment. Please be nice LOL! 2000 4Runner Limited Went to leave the other night...

*Rack and pinion. Stupid auto-correct. Need to chase down the open circuit in pretensioner on driver side too. B0136 code is about to drive me mad.

I was thinking the dome wire itself had shorted to ground somewhere along its journey to the back of my rig. I will definitely check the harness you're talking about one day soon when this rain lets up. I jumped out C27 pin 1 and 5 and have headlights now though!! Brights, low beams, and fog...

The test light never went off at all when I was testing everything in that circuit. We tested and found that pin 7 had constant power and clipped it to be able to use everything else. I still have a rear dome light and haven't noticed what I'm lacking since clipping the wire. Going to roll with...

Thank you!! Long reply (couldn't find how to quote lol) listed above this one. I've interacted in forums before, but mostly just read. Since I plan on keeping my 4runner forever, and doing all repairs myself, I look forward to interacting in this forum. Thanks again!

I hadn't realized that you responded to my comment/post yet. I apologize for the late reply, and want to thank you for your response. I have made it a point to look for you and IBallEngineer when searching this forum, as you two seem to really lay things out and know what you're talking about...

I've been using these threads where people are trying to figure out the dome circuit. I made it to unplugging 3C and the beep went away, after 1e, 1a, 1f testing. After unplugging 3c and continuity being disrupted, what do I do next? I'm sorry if it was mentioned somewhere previously, but after...