Recent content by CO-4Runner

Found One I just found one on ebay. The guy 3D Prints them in the US. Its just the plastic frame......you still need to buy the filter media, but can probably get a home HVAC filter from Re-Store for a few bucks, that will cut to make 6-10 filters. About $24 after shipping...

Sun Visor Clip FIX For the solution referenced above...... Here's a quick 1min video that shows how its done. https://www.youtube.com/watch?v=_NMI8V3grz0&feature=youtu.be

Sun Visor Clip FIX Don't buy another clip. I did, and it broke upon first use. I found another solution. I didn't create this fix, but I cant remember where I saw it. Basically just wedge a piece of rubber vacuum hose into the hole left after it breaks. Here's a quick 1min video that shows...

Solution to Broken Sun Visor Retention Clip I know this thread is old, but wanted to provide a solution to all those looking for replacement sun visor retention clips. You can cut a shot 3/8" piece of rubber tubing (7/16" O.D. and 1/4" I.D.) and stuff it into the square hollow opening inside...

Solution to Broken Sun Visor Retention Clip If you are all wanting to replace this retention clip because the little plastic flex-tab broke off, then I have a better solution. I too ordered a new (supposedly Toyota made) pair off ebay for my 99. I installed them fairly easy. Driver side...

Iac Did you test out the little motor in the IAC to make sure the cam is moving properly/freely? Would be nice to test it before and after cleaning to see how much it helped. That coolant junk in there looks pretty bad. Was it clogging the IAC path significantly, or just more cosmetic?

231mm Fit Did you already have the 231mm calipers with the 5 star wheels mentioned above (and they fit without grinding modifications)? Or did you upgrade to the 17's to make them fit?

Grill What kind of grill do you have? I like the look, and am thinking of doing something similar with my 3rd Gen.

Testing My Fix for the Slip Yoke Thunk While driving to a few clients locations, I was taking care to evaluate my recent slip yoke disassembly, cleaning, and re-grease with Ford's XG-8 PTFE grease. Today was driving miles 50-100 after the slip yoke job. Still a bit early, but it hasn't come...

Zerk Fitting Can anyone who has disassembled the slip yoke, fully cleaned, and re-lubricated with Ford XG-8 PTFE grease, recommend if the zerk fitting should be installed after the yoke has been fully compressed and then expanded back to its neutral position? I am wondering if it is better to...