Recent content by ct221933

I got the same one except with black cap. Rubbing in the front and need to trim.

Guys, My mistake.....I cut and pasted the wrong cells from my spreadsheet...I checked my spreadsheet again and the correct measurements are Front Driver: 36.5 Front Pax: 36.9 Rear Driver: 37.75 Rear Pax: 38.25

I have the setup you mentioned, including rear bilstein 5100. Here are my measurements : Front Driver's: 36.75" Front Passenger's: 36.90" Rear Driver's: 36.10" Rear Passenger's: 36.60" Here a few pics. <a...

I am guessing the dealer was lucky in guessing the mileage.. My previous company makes telematics devices that attaches to vehicles (fleet cars, trailers, rigs, earth moving equipment etc...) using satellite or cellular technologies for asset management. These devices can track temperature...

Thanks all.

At work, we do not have covered parking. Any recommendation for a sunshade that fits the 5th Gen T4R? Thanks.

Can you post side-view pictures please? Interested in seeing how it turns out.

Here are the measurements with front bilstein installed at 3rd notch and rear is stock. Front Driver's: 36.75" Front Passenger's: 36.90" Rear Driver's: 36.10" Rear Passenger's: 36.60"

Maybe....I compared notes with another fellow T4R.orger who has a SR5 without 3rd row and no leather. He did not have a reverse rake with just the front bilstein set at 3rd notch according to him. The only possible explanation for my slight reverse rake with only front bilstein set at 3rd notch...

Just a word of caution....setting the front bilstein 5100 at 1.75 (3rd notch) will not level the truck....instead you get a slight reverse rake. I measured it after installing Bilsteins just in the front and could not stand the look. Had to install spacers in the rear.

When I decided to install the Bilstein shocks, and lift the vehicle, I considered 2 choices: a local 4-wheel store or a national vehicle maintenance store . I chose the national store precisely because they stand behind (written in the sale invoice) the product they sell and install. So if...

The Daystar 1.5" rear spacer part number is KT09127BK. It is for FJ Cruiser but fits the 5th Gen. I too only had the Bilstein 5100 set at 3rd notch (supposedly 1.75" height on average). The vehicle front appears to be slightly higher than the rear and decided to add the Daystar 1.5" spacer.

Will be looking out for you....and will snap a picture...are you in Cinco Ranch area?

The rear for Tacoma will not work for the 5th Gen 4Runner. The part # for the rear is F4-BE5-E703-H0 for 5th Gen 4runner

I have not modified any of my previous vehicles. From reading this forum, it gave me confidence to install Bilstein 5100 (front and rear) and leveled out the front. It helped reduce the nose dive and body roll noticably.