Recent content by DanLuo4Runner

Clunking Noise in front end when going over bumps I have a 4th gen 4Runner limited with 169000 miles in great condition. However i have a noise in the front end when i go over bumps in the road. It's not anti rattle clips on the brake pads as Ive replaced them with new and they are quiet...

I've wrestled with this problem for some time now. I've replaced the blade, spring, wiper arm(completely), and no change. The wiper blade barely touched the glass. Otherwise, it worked fine. The only solution is this. You need to remove the arm assembly from the splined motor shaft, then remove...

There is no real adjustment to this rear wiper arm/blade. The arm typically gets pulled from car washes. I do have a permanent fix for this though. You'll need to pull the entire arm off the splined motor shaft. But first, remove the plastic end cap by slightly spreading the sides and...

Look at the pics in my photo album to see the area that needs shaving to get the arm to apply greater pressure to the window. This is a great fix to this nagging problem. Mine is working great and seems to be a permanent fix to the problem. It's also an easy fix once you get the arm off and...

use a small pulley to grab the arm and pull off the shaft then use the instructions above to really correct the problem. I have pictures of the parts if you're not sure what area of the arm to shave. Good luck.

I've wrestled with this problem for some time now. I've replaced the blade, spring, wiper arm(completely), and no change. The wiper blade barely touched the glass. Otherwise, it worked fine. The only solution is this. You need to remove the arm assembly from the splined motor shaft, then...