Recent content by datq1doe

It’s been a while since I’ve been back on here

Got some 285s on the truck and took them out to an off road park this past weekend. Follow me on Instagram @appa_rnr Sent from my iPhone using Tapatalk

Here’s the lift with my new tires. Went with 285/70r17 ridge grapplers. Stock wheels no spacers. FCP stage 2 with performance load all around. 3 in. in the front 2in. for the rear. Seems I have a little negative rake so I might need to adjust the front down a bit. Sent from my iPhone using...

Shhhhhhhh. I’m just looking for excuses to upgrade [emoji23] Sent from my iPhone using Tapatalk

Forgot to take stock measurements before the install but it’s been a couple weeks now. The springs have pretty much settled. It looks like I ended up about one inch higher in the front than I should be. There is a very slight negative rake. Only noticeable if you’re staring close enough. Nothing...

Does anyone know what size and length that bolt and nut is? I stripped them during install and need to find a replacement at the hardware store because dealerships don’t keep them on inventory. It connects the lower bushing of the strut to the lower control arm. Sent from my iPhone using...

So I received my lift today and upon inspection I noticed a couple things that worry me..(I opted for pre built coil overs) First was the coil labeled “driver side” was actually set lower than the one for “passenger “. Opposite of what they should be to offset driver side lean. It could be that...

Anyone have a tray in/near Austin TX? Or is willing to ship? Sent from my iPhone using Tapatalk

Been following this thread for a while. Just took advantage of their summer sale and bought the stage 2 FCP. Should I consider an front diff drop kit with this lift as well? Also have you had any issues with the sway bar coming into contact with the front crossmembers after the relocation...

Installation was very easy. You don’t even need a drill. Just a screw driver and maybe a pick to puncture the plastic first to make it easier. I recently bought a cheap molle pouch off of amazon that I MacGyvered into a “concealed”carry. Sent from my iPhone using Tapatalk

Installed a center console molle panel from victory 4x4. Sent from my iPhone using Tapatalk

Got the RCI sliders installed. For something that costed almost $1000 I was disappointed that it had some powder coat blemishes. Not that that will matter when these get put to use anyway. Sent from my iPhone using Tapatalk

How loud do those babies roar?

Changed out lights last night. HID lows and LED fogs in yellow. Added black badges today. I’m really not a fan of the little chrome grille accents. Might paint those black later on. Sent from my iPhone using Tapatalk

Little badge and lighting from last night/today Sent from my iPhone using Tapatalk