Recent content by datsunsrule

If it did settle, I didn't notice or record it.

Very cool set-up. Looks great. I have the same exact suspension and tire size combo, but I went with cooper discoverer ATP's, 884 and toytec 2"s. i ended up about 2" and 2."

It wasn't too stiff. It just sat really high in the back, like 4-5 inches. My Bilstein 5100's were maxed out. The company I bought the coils from made a mistake on the order and sent me RC2.0HD instead od RC2.0. The HD coils are designed to give 2.5 inches of lift with 400 lbs additional...

No issues what so ever. The shop I took it to got it extremely close. I've read that you can go up to 3" before needing to replace uca's. Just to play it safe I kept the 5100's set to 0", with OME 884's, for about a 2" lift. Hope this info helps. Good luck! Chase

Updated pictures, after swapping the Toytec RC2.0HD rear coils with the standard Toytec RC2.0 coils. Current set-up: 2005 V6 SR5 4x4, Bilstein 5100's all the way around (Set to 0"), OME 884 front coils, Toytec Superflex RC2.0 rear coils, Cooper Discoverer ATP 255/75r/17 tires

Good eye. It is!

So, to clarify (For those that are trying to decide on a lift)... The rake you see on my truck is caused by using the Toytec Superflex 2.0 HD's, not the standard 2.0 coils. I should have double checked the order before installing. I'm going to be swapping them out tomorrow, and will post some...

Are your bilsteins set to 0"? I'm about to pull the trigger on a set of 895e's, but I want to make sure it'll fix the rake. Otherwise I'll go with some stock FJ Moogs. Thanks! Chase

Unfortunately, I don't own any Datsuns, but I wish I did. I do have 5100's in the front and they're set to the 0" setting to avoid pre-loading the 884's and to minimize stress on the cv's. I came really close to getting the 895e's but read some threads where people were criticizing them for...

I just lifted mine and I was torn between toytec 2" and ome 895e's. I chose the toyecs for the smoother ride. When paired with 884's up front and 5100's I kept a significant rake. Keep in mind I have the 5100's on the 0" setting as not to preload the 884's. Still trying to decide if the rake is...

Hello, This is my first post! Here's my specs: 2005 SR5 V-6 4x4 - 884 OME (front)/ Toytec Superflex 2" (rear) Bilstein 5100's, Cooper Discoverer ATP 255/75R/17 Still has factory rake...I'm trying to decide if it's too much or not. Rides WONDERFUL on and off road. -Chase