Recent content by DBR4runner

  1. D

    Passenger Side Mirror for 3rd Gen 4runner

    Cleaning out the garage and found a spare passenger side mirror. It has a few small cracks in the outer shell, but is usable and working. $35 + shipping. Located in SE Michigan. Thanks
  2. D

    ISO 96-00 3.4 4x4 5speed

    I got a nice one... see my thread on here.
  3. D

    FS: Super clean 3rd gen (1999 4runner Ltd) - $5000 -Redford, MI

    Friday bump. A few people asked about the timing belt. It was done at 85k. The frame is in excellent shape. There was frame rot by the right rear trailing arm when I bought it, but this was professionally repaired. All rotted sections were cut out and replaced with CNC cut steel and expertly...
  4. D

    FS: Super clean 3rd gen (1999 4runner Ltd) - $5000 -Redford, MI

    Timing belt was done by the original owner.
  5. D

    FS: Super clean 3rd gen (1999 4runner Ltd) - $5000 -Redford, MI

    Super clean, two owner vehicle. 167k miles. Fully loaded with 3.4L V6 engine, automatic transmission, towing package and multimode AWD system. Well maintained with all records. Only synthetic oil used. Recent oil change (November 2019) and overhauled brakes/suspension in November of 2017...
  6. D

    Simplifying oil changes

    I prefer the suction type devices. I stick a tube down the dipstick hole and vacuum the oil out. No need to get on the ground, pull the skid plate etc. Faster and cleaner. A good setup is only about $60.
  7. D

    Purchasing high mileage 3rd gen

    The mileage is high, but these trucks are extremely reliable. Provided it was well maintained, I see to problem. My biggest concern would be rust.
  8. D

    Best Suspension Upgrade for the Money

    Replace bushings. To me, that's the best bang for the buck. Cheap, but takes a good amount of time/effort to install. I installed KYB shocks in mine. They're good, but a bit stiff. I would inspect the strut mounts too.
  9. D

    Where the heck are my South Carolina dudes??

    Back when i lived in Aiken, there was a good off-roading community in the area.
  10. D

    Replacing crank position sensor on a 2005 V6 - how difficult?

    Looks very easy. However, I would try cleaning the electrical contacts and the sensor and reluctor wheel first. I've seen crud get on these and cause problems with the sensor. A quick squirt of cleaner and compressed air fixes the problem.
  11. D

    Just had 4 studs broken after simple cross rotation

    Sounds like over-torquing. Dumbasses :(
  12. D

    Would love your advice - Maintenance on 2008 4Runner at 200,000 miles

    This is a good list. I would only add a couple things that I *think* I didn't see: -fuel filter -spark plug wires I buy almost everything from RockAuto these days. It's very easy to get a 5% off coupon for them

Members online

Forum statistics

Threads
278,306
Messages
3,554,045
Members
248,016
Latest member
Advally Service
Back
Top