Recent content by djpg2000

Already contacted them. They don't have and can't make anything for a rearview mirror display. They only have stuff for the models with NAVI. ☹️

Hi! I'm looking for AntMan/Sp8Ball Rear Camera Mod PDF because the images in the original post are not loading. I have a 2011 4Runner with the display in the rearview mirror (NO NAVI). I would greatly appreciate somebody pointing me to where I can find it or just uploading it here. Thanks! Here...

Thank you man! I will definitely be using that method. I'll probably redo it soon but I just wanted to make sure it worked and kept on working for now..lol. Thanks again!

Found the culprit. I didn't get any continuity between A40 pin 5 to the relay/driver side junction box assembly at connector 2D pin 9. So, I started checking the wire and saw that it had been spliced into. When I looked at it more closely, I saw a ton of corrosion all over the wire (pictured...

Thanks for spelling this out for me because I am by no means an electrician. But, I can follow directions..lol I will update you guys on the results when I have them.

This is so messed up. I just jiggled all of the connectors and wires that I could see all the way back to the firewall and nothing. If water got into the fuse box, I'm pretty sure I'd be having much more electrical problems than just fog lights don't you think? All of the other lights have...

I honestly didn't check for continuity between the two terminals of the bulbs. What I did instead was hook them up directly to the battery via alligator clips and they both lit up which indicated to me that both bulbs are good. For #3 - Power and ground keeps randomly alternating between the...

1st Picture: What I've been referring to as a bulb. 2nd Picture: What I've been referring to as a socket including and since post #10. 3rd Picture: What I've been referring to as a socket up to and including post #9 and a plug including and since post #10.

I bought it used a few years ago and the fog lights worked perfectly fine. I took it off roading and flooded the engine(yeah I know). Water level was only half way up the wheels but it happened. I was especially pissed since they advertise these things going through water. They had a track set...

Well, I would say that's possible but highly unlikely because the sockets came brand new attached to the bulbs from the auto parts store a couple weeks ago..

Well, I would assume the sockets are fine because when I said I hooked up the bulbs directly to the battery and they lit up I actually never removed the bulbs from the sockets. I just put alligator clips on the prongs of the sockets and hooked them up to the battery...

I'm sorry, I guess I was using the wrong terminology. When I was saying sockets before I actually meant plugs. I was testing the plugs the entire time. Any other ideas? Also, the relay does make a noticably loud clicking noise when I turn the switch on. Some websites say that means it's bad and...

On second thought, I knew I wouldn't be able to sleep tonight if I didn't try this last thing. So...... I tried adding a temporary ground on BOTH sides in TWO different ways just to make sure. The passenger side had power this time and the driver side did not. NEITHER BULB LIT UP. ☹️ Now what?

Ok. I'll tackle that part tomorrow and let you know. Thanks for all of your help so far.

So, now I'm extra confused but I think I know what I should do. This got very confusing very quickly because this has been playing tricks on me and making me second guess myself. Here is a quick list of events: 1st Check: I believe both sides had power but can't remember for sure. 2nd Check...