Recent content by Doc2012

  1. Doc2012

    cheap smoke machines

    You can use a paint can to make a ‘smoke machine’. Done it a couple times. Sent from my iPhone using Tapatalk
  2. Doc2012

    Power outlet issue

    If you’re close to coastal NC; PM me and I’ll help you figure it out. Sent from my iPhone using Tapatalk
  3. Doc2012

    Lefty is coming back!

    Apparently not. I got lucky with my lefty; just need to find time to finish my truck and actually install it. Sent from my iPhone using Tapatalk
  4. Doc2012

    Absent for a lot of years.

    12 years. Jesus I’m getting old. Sent from my iPhone using Tapatalk
  5. Doc2012

    ACC / On Ignition source under hood?

    Fog lights; mirror heater; defog; power outlet (unless you did the full time mod). Sent from my iPhone using Tapatalk
  6. Doc2012

    Hayden 698 transmission cooler install with custom brackets.

    They make a ‘zip tie’ that holds it on as well. Goes in between the fins of the cooler and radiator. Ran that for years before I found a 5-speed to swap in. Sent from my iPhone using Tapatalk
  7. Doc2012

    Speedometer calibration questions - again.

    Different manufactures made the ABS units; ford and Denso. I honestly do t think they have anything to do with fixing a Speedo. It’s all in the ECU. Sent from my iPhone using Tapatalk
  8. Doc2012

    Speedometer calibration questions - again.

    From my understanding the ABS Signal goes into the ECU then into the cluster. ABS systems don’t have a ‘ECU’ in them on the 96-00 trucks like the 01-02. Therefore; the ECU, from my understanding, is what controls the Speedo. Which is again, why, the Speedo can not be corrected without an...
  9. Doc2012

    P0171 - System Too Lean Bank 1

    Deductive reasoning. Cleaned, tested, and replaced everything that the FSM said was related to the 171; and it still showed up. So then I moved onto the fuel system; replaced the filter with no change; tested the pump (within spec); ohmed out the injectors (within spec). Just for poops and...
  10. Doc2012

    P0171 - System Too Lean Bank 1

    Mine was a partially clogged fuel injector. Sent from my iPhone using Tapatalk
  11. Doc2012

    Speedometer calibration questions - again.

    I sent you a PM. Sent from my iPhone using Tapatalk
  12. Doc2012

    Speedometer calibration questions - again.

    Correct. Because no one has successfully gotten into the 3rd Gen 4Runner ECU. Sent from my iPhone using Tapatalk
  13. Doc2012

    Speedometer calibration questions - again.

    I have a Dakota digital SGI-5E in mine. Pm me and we can talk. Sent from my iPhone using Tapatalk
  14. Doc2012

    who is joe joe parts on facebook

    His real name is Joseph Hudspeth (or Lundberg). I asked him for prices on some stuff, while I was waiting on him to get back to me, I did my own research and found the parts cheaper than he could supply them from Toyota. Other stuff that’s come to light are previous felonious charges that...
  15. Doc2012

    Build your own Bandit Bumper - STEVENSVILLE MI

    I’m sure this isn’t what you had in mind; but just a testament to the design of these. (Yes. The wings are tac’d; but the main beam is welded to the frame supports.) Sent from my iPhone using Tapatalk

Members online

No members online now.

Forum statistics

Threads
278,306
Messages
3,554,045
Members
248,016
Latest member
Advally Service
Back
Top