Recent content by earthpower1

jafrush , do you know if there are Yakima mounts that are a direct fit to the LFD crossbar? I would love to be able to use all of my collected Yakima racks, baskets and boxes without fabricating mounts... Thanks! Jason

I'm curious about the details and would like to see more pictures. About to spend big$ on a hitchgate - would love some options. Sent from my SM-G930V using Tapatalk

Thanks for the first hand info. This is really a backpacking trip, with several potential trailhead. What was your favorite or not to miss trails? Sent from my SM-G930V using Tapatalk

I'm preparing for a trip to the Doll House in Canyonlands in March. So, self supported a long way from pavement. What are the things most likely to break that I should have parts for and be able to fix on the trail? 05 Limited, V6, Toytec/Boss 3/2 lift, 255/80/17's, sliders, front skid.

Damn. I don't want to buy UCA's! Dropping the air pressure helped a lot. Thanks.

OK, dropped the pressure to 37ish and WAYYY better. Still pretty loose at 75mph, but not death defying. Thanks for the advice, never had loose tires fixed by having less air. I typically run max pressure in my Yaris and Prius.

similar problem I've had what sounds like similar ride quality problems after lift. Did you get yours sorted out? If so, how??

Oh, it came from the tire shop at 45psi, after the sloppy handling I went up to the cold max of 80psi. Sent from my SM-G930V using Tapatalk

Got it aligned today and it is somewhat better but not what i hoped for. The scary part is in the steering. At speed it is very slow to respond - like driving my grandma's Cadillac with 10lbs of pressure in the tires. The slow resonse turns into over steering then to over correction and then...

Had maxx 280 70r17's put on my 4th gen today - the handling is down right dangerous! I put them on the stock wheels from a 2016 t4r, so they are only 7" rims. Toytec Boss 3" lift that rpde fine with the 265's. I've read about a break in period that might have sloppy handling, and I haven't had...

OK, so this is pretty embarrassing, but I got it figured out. Second hand BOSS kit off of a Lexus gx470. I assumed that the max possible setting was the 3 inches recommended not to exceed. Further, I assumed that the coilovers were set to that 3 inch mark. I jammed them in and observed all the...

Flip flop, thanks for the info and the pics. Yeah, I've got something wrong. I do have the diff drop kit installed. My BOSS kit is second hand, so 1. I don't really know the current setting, and 2. I don't have a spanner wrench to adjust them! I measured my change at just under 3 inches and...

Not sure why it posts sideways...the sway bar is headed downhill. Sent from my SM-G930V using Tapatalk

Yes, drove a fair amount - enough to straighten things out. Sent from my SM-G930V using Tapatalk

Awesome, thanks for the Intel, will do that next. The CEL inspired me to buy an OBD reader to reset the codes, which is handy because the traction control gets dropped with the CEL. Sent from my SM-G930V using Tapatalk