Recent content by Erich_121

Hey guys, I found a leak in my return hose. It is # 11 in the diagram. you can see it if you look right down from the engine compartment, it sits on top of the frame. Anyone know the diameter of the metal pipe and hose diameter? I really don't want to spend $100 for such a small line. It's a...

I just replaced the old sensor with a new one, being dirty seems unlikely. I did notice that the abs light does not come on when driving on the interstate, usually it comes on when slowing down and making turns. It will turn off after a while, then back on again.

My abs light keeps coming on and off when I drive. I checked the connections and they are good. I checked the codes and they are the same as last time. Code 32 & 36.

I replaced the sensor and cleared the abs light. I drove for a few days and it didn't come on. Today while driving it came on for 10 min then turned off again. Any ideas?

You're right, it does. I thought it would be easy but mine was corroded pretty badly.

New one ordered, paid $98 shipped. I guess I didn't realize they came out so hard. I probably should have taken the hub apart to get to it.

I would recommend replacing the relay first.

I tried removing the sensor but it was seized in place and I ended up breaking it off, leaving a piece in the hub. Any suggestions?

No CEL light. Thank you BlackworksInc! I searched and searched but couldn't find a good source for what the codes were. I will take a look at it soon and post back what I find.

Hi guys, my abs, vsc off, and vsc trac lights came on last week and I got the abs controller to flash me the codes. 32 & 36. But I can't find anywhere what the codes mean. Anyone know? Thanks.

how do I add one to my unit?

That's funny Jayden78, I think we drive the same vehicles, my wife drives an Acura TL.

I would recommend you pick up a mechanics stethoscope and listen to each bearing.

I did this and the noise is gone. Thanks a lot TRDCal!

It's possible. Maybe wait a few days and monitor the noise?