Recent content by GhostRunner

http://www.toyota-4runner.org/attachment.php?attachmentid=103868&stc=1&d=1385820160

I had no clue you can do that through bluetooth, you know how to set that up? Here is a link for ya....KMC HOSS 20"...Since these picks I installed daystar lift/leveling spacer/coil springs http://www.toyota-4runner.org/5th-gen-t4rs/72822-grille-guard-kc-lights-rims-installed-my-limited.html

on my limited when I connect my iphone 4S through the usb interface pandora may play for about 30 seconds than it stops and says its not recognized, or else it jmust won't play at all. Will the nav support pandora or just the music on the iphone playlists? thanks for the help

Haha, this forum rocks! I appreciate all the responses and everyone looking out for me. Would have no clue where to start without this forum (I also would have never got into this situation if it wasnt for this damn forum, I didnt even know what a lift was until I started looking at all the...

I bought the 4pc kit, 2 rear spring coils and 2 front top spacers. I gave my installer some suggestions from people on this site and it clearly said to undo the "brackets" for the xreas lines and ABS lines so not to stress them, but I have a feeling they didnt do this. This just sucks now, I...

thanks, The 4wd knob hasnt been touched, its at H4F The spacers in the front were installed without having to compress the spring or remove the strut. Harper, I printed out a bunch of info that you had suggested about the xreas system for extra info for them. The top spacers sits right on top...

Hey guys, Today I had a Daystar 2.5"/1.5" Top spacer and Rear coil installed on my limited. The installer sent the truck to NTB for the alignment and told me to pick it up from there. NTB told me they couldnt get the camber to exact specs but very close and alignment is fine, BUT They also...

Keemonrunin Nice work! So all you need extra is that tube spacer, the rest is the included mounting harwarde with the step, correct? Also, did you drill 4 holes through the spacer to fit the screws, and did you sodder it? thanks for the extra effort with pics they are very clear and easy to...

Any suggestion on what type of paint to use on my "stone guards" for my kc aux lites. They are glossy black, but have a big white "KC" on them. I want to paint over the white KC to make them all black. They are made of "Super Tough Black ABS Plastic Stone Guard" thanks

YouTube - How to use a clay bar on your car here is a clip on youtube of how to correctly use a clay bar... it was helpful to me because I've never used one before. good luck

Yep, I got the same thing going on. Its on the back of my truck,,,I can get them off with microfiber towel too but I'm concerned about this for the future.

I called and talk to Daystar Tech support and he said the kits they have only go up to th 2009 4Runners, and that the 2010 is a whole different "monster". He didn't seem to well informed about the 2010's I was thinking he was just covering his as* by not recomending it. Does anyone know if...

Harper, was your truck level with the 2" spacers or did the rear settle and leave you with a reverse rake. I emailed Toytec and was set to order a 2" front lift spacer, and they recomended the "top spacer" instead, because they said the rear will settle and possibly lead to the front being...

So, If I was to got with a Toytec Ultimate 3" Lift would I need to purchase UCA's also. Are there any other parts that are "necessary" to get along with the Ultimate lift Setup which is around $1200.. I really dont plan to do much offroading mainly street driving, just like the stance and look.

Wow... Alot of nice bikes you guys got....i had to ditch mine when the wife and fam came along...man i miss it. Wife has a mazda cx-9 grand touring...good family vehicle and its not a minivan so i cant complain! The kids have a battery operated riding HUMMER that they offroad on the sidewalk...