Recent content by Gondi

Totally sucked when mine slipped off. I slipped two flatheads between the seat and the plastic housing to make an X with the bolt at the crux of the x and then about 20 minutes of trial and error. Finally caught the thread and screwed it on.

Closing this loop. Unplugged the fan blower and got a reading of 12.2 from the plug when I turned the A/C on. Removed the blower and it spun freely, so on a lark I plugged it in while holding the blower, and it worked fine. Spun up, changed speeds, totally fine. I ended up putting it right back...

2006 SR5 V8 My fan is not working. Doesn't matter what fan speed setting. The A/C itself is cooling because I can feel cool air when driving and the vents are open. Twice the fan has kicked on after about 15 minutes of driving and everything works normally. LEDs and LCD show correct fan speed...

This sounds really similar to a problem I'm facing in my 4th Gen. I can hear the a/c click when I turn it on and off, but turning the fan on and off (even to high) doesn't blow. When driving with the a/c on and the vent open, I can feel cool air coming through without a fan. Twice after driving...

Having the same problem -- I'll check that

Old but still useful post! Thanks!

thanks

Thanks for the info -- same problem

Thanks

Same - looking for some glue to hold it back

Same

Thanks

Thanks for the info!

Thanks! Super helpful

Seems like the two options are buy a new $500 motor or open the seat and fiddle? No definitive fix?