Recent content by Gongshow

Hey guys, 1999 SR5 3.4L 4x4 auto trans with J-Shift. I blew the 10A Display fuse on the lower left fuse block on the driver's side. I lost all readings on the instrument cluster and the fan blower control. I drove for a little bit and it drained the battery. I got towed home, recharged the...

I've got a '99 SR5 4x4 that has power door locks but it does not support the OEM remote. I want to put a remote start kit in and tie the keyless entry/remote capability in with it as clean as possible. Any recommendations?

It sounds like the exact same thing that my Tacoma was doing when the U-Joints were going out. Once I replaced them, everything was super smooth.

It sounds like HVAC , like the blower fan (like others have suggested). I did see in the video that there's a vent right under the steering column; if something is going on with the blower, the sound will follow down the ducting. Does it change (louder or softer) in direct relation to the fan...

I don't believe that the 4WD models have a wheel bearing on the front as traditional 2WD (with RWD) vehicles would have. You have the CV half-shafts in order to accommodate the IFS. If it was something where one of the boots was torn, you'd certainly see a bunch of grease schmoo flung...

Spark Plug recommendations I've had my 96 Tacoma for 20 years and last year bought a '99 4Runner 4x4 3.4L. I know that they need the double electrode plugs but wanted to get your thoughts on which plugs I should go with on the Runner. Denso Double Platinum...

If it's been a few years, the contacts could be corroded or could be worn down; especially if you are making short trips and constantly starting it. Give the percussive maintenance or attempt the Fonzerelli Fix to see if that works.

I had similar issues in my '96 Tacoma 4x4 V6. One of the spark plugs was cracked and shorting out on the spark plug tube. I experienced the sluggish, misfire/hesitation going up any sort of grade. Timing marks all lined up so I was perplexed at the cause. my little brother came up to visit, we...

Your individual state laws will likely govern how your coverage works in the event of a loss. I'm a licensed insurance producer in WA State and what's described as "Full coverage" really isn't. It's comprehensive/collision and there is usually a deductible involved. When you have a loss...

I wouldn't worry about gaskets or the JIS screwdriver. Get a philips head that fits nice and snug, then make sure that you have good pressure to crack them loose. Some Seafoam or foaming carb cleaner should do nicely. When putitng it all back together, remember, "Tight is tight, too tight is two...