Recent content by halo32c

The shaft that's built into the housing snapped off. I used a dremel and cut a notch out to use a screwdriver to remove the bolts. It's up and running but the white plastic pin that holds the ignition lock cylinder broke. So now I have to hunt up that part number. Replacement part number...

Looks like I just joined the club So thankful for this forum. This just happened to my 99 SR5 this weekend. I thought it was the ignition lock cylinder but I actually need to replace Steering Column Housing Support Upper Bracket 4528035350. If I read correctly the bolt needs to be broken off...

Amazon.com: iOttie HLCRIO104 Easy Flex 2 Windshield Dashboard Car/Desk Mount Holder for iPhone 6 (4.7) /5s/5c/4s, Galaxy S4/S3, HTC One - Retail Packaging - Black: Cell Phones & Accessories This one works pretty well.

That seems a bit high or a motor swap. I would shop around for a few more quotes.

Discount Tire Thinking about going with the Cooper ATP. Price out the door with warranty $739.38

In Austin but she's only an SR5 2wd............

In that case, new wiper motor.

So all you have is the wiper motor shaft sticking out? If so there is a 10mm nut that holds it on the motor.

About an hour total from start to finish. Took longer to wiggle motor out then it did to take off panels. 4 bolts inside panal for motor(think it was 10mm socket) and 10mm nut to remove wiper arm. Wear gloves or you will missing skin from your knuckles! Still not sure how motor frame was...

rear window Rear window issue fixed. Pulled wiper motor and found that wiper motor frame was a little tweaked. Bent back into shape, reinstalled motor and window now works like a charm.

Thought about trying that but was afraid of denting outer skin sheet metal. I'm off tomorrow and will give that a shot. I'll try to post pics of window hitting wiper motor too.

I have the same problem and found that the window is hitting the rear wiper motor and getting stuck. So far I have not found a fix for this problem. Track seems fine and bolts for motor are tight. You may want to see if this is your problem.

Same Problem I have the same problem when trying to lower window. Track seems fine and motor is not loose. Any fix for this?

So any suggestions on where to mount my crossovers Polk Audio DXi6500" "? Also wanting to stick to polk audio on rears but crutchfield is showing none will fit. If you have polks in your rear doors what model did you go with? Any suggestions welcome?

Looking to install a Sony backup camera. Any advice on where to install? License plate location is a little tight with lights on both sides of handle. Thought about spoiler, but sony directions said cam should be hidden by body. Any type of bracket suggestions? I read a post where someone used...