Recent content by hewitt-tech

Other possibility you got a crap rebuilt master cylinder and need to get another. Bad remans. happen all the time and will drive you nuts. There is no special procedure to bleed the ABS, even if you replaced the ABS actuator you just follow normal bleed procedures, the fluid goes through it...

The Rutech and other bypasses will cause a P011B Temperature Correlation code on the 08 and newer vehicles. There was a change in how the computer does this test starting on the 08 model year vehicles. We have a specifically designed bypass kit for the 08 and newer vehicles for this reason. We...

:brick: Your engine WILL NOT run correctly without proper signals from the upstream 02 sensors and will do exactly what you are describing. This is what I call the gas cap syndrome. It is where people ignore the most obvious problem and instead search for another reason for the problem. I call...

Please don't take anything Rutech says as factual. He did not design what he is selling and his units are made in China regardless of what he claims. He simply sells them and does not understand how the system actually operates.

When we first got our 4 runner it had some valve train noise in it and I checked the oil. The oil had clearly just been changed because it was nice and clear but it was over a quart. When I topped it up I noticed it was a real pain in the ass to get an accurate read on the dipstick because...

I know this is bringing this thread back from the dead but I couldn't help it. That is the "Air Injection Control Driver" the part number on our 15' 4Runner is #89580-60050 It is supplied battery power on terminal one of the 2 wire connector and also ignition power (the delayed source you...

How much?... looking to maybe modify a rav4 one to fit my trail running rx300.. It would at worst look better than that on yours..lol

I had mine down on my tundra a LOT but had to make sure to keep the bed clean or keep it under 50 so trash wouldn't swirl into the back of my head and on the dash. All 4 windows and the back galss down = AWESOME! The hatch on our 15 4runner hasn't gone down but once while driving because of...

Depends on the lights. Your ground and power supply wires should be sized accordingly. The longer the runs you may want to go up a size. Even LED lighting can require a lot of current. As pointed out connections add resistance, the same for long runs so the shorter the runs and the fewest...

Or just search the web, maybe some of the universals like this. http://www.jcwhitney.com/ventshade-stepshield-door-sill-plate-set/p2009238.jcwx?filterid=d2166y2015g34u0j1

The clear film will scratch but it is decent. It wont take any heavy abuse but you might also be able to get some really thick vinyl like they do for wraps and just put a couple of layers on there and just change as needed. One crazy idea would be to get some thermoplastic like kydex and make...

Just got the wife a 2015 limited with 23k on it. I have driven it a few times and we took it on our first little road trip. I noticed it is a slightly louder engine from the start. When we got back I cranked it up the other morning and it sounded like a rod was starting to knock. Pop the hood...

Thats pretty much a steal. I like the factory JBL unit in my 05 Tundra. Just added an extra amp and 2 8" shallow mounts under the back seat is all it needed. GL.

It is a known cold weather issue that a few of the 05 and a hand full of the 06 vehicles have had. It can happen with or without the bypass module installed, it is just a glitch in the computer. We have a better explanation of the P2445 code on our website here: Codes Currently the only fix for...

Hey Guys, I have pretty much spent most of my time the past couple of years over on the tundra forum mostly and have neglected the others for lack of time. Well, I recently traded my 05 and 10 tundra in on a 2015 4R Limited and figured I should say hello again. I think I had a username of PXSP...