Recent content by highalti2d

2006 V6 with 230K miles. Ignition coil boots were cracking so I replaced the boots and seals.

The OEM 4th gen roof rail bolt part number is 63230-42010. Hardware stores carry a M8 50mm (1.25 thread pitch) which is similar. Note: The 50mm length is required to attach OEM roof rails. A different bolt length may be required for aftermarket applications.

I'm experiencing a similar issue with the rear anti-squeal shims falling out. I purchased a 2006 SR5 which you could hear a squeak-squeak-squeak from the left rear wheel while driving without brakes being applied. The previous owner had the rear brakes done at a local $99 shop. Upon inspection...

I bought a set of new strut assemblies from a 2022 owner and installed on a 4th gen 2006 SR5. Both coils had orange/white dots and same coil count. I've only been driving it for a week but It seems to ride okay so far. Perhaps the stiffer coils aren't impacted as much on the lighter 4th gen...

Thanks for the input. I bought a replacement ABS Actuator at the junkyard for $40. Went ahead and replaced the master cylinder, front pads, rotors and rebuilt the calipers. Everything is good so far. I'm really enjoying this 3rd gen (previously had a 5th gen TRD ORP but sold it back to the...

This is the only thread I could locate which is similar to my situation. I'm looking for input regarding whether this is something commonly encountered on 3rd gen 4runners. I have a fairly clean & stock 1998 4runner Limited with 186k. Over the past couple of months, I've noticed a slight brake...

Purchased new '17 TRD ORP (non-KDSS) and noticed left/right swaying issues on the highway. The 2002 Tundra I previously owned drove effortlessly and straight as a rail on the highway. At first, I attributed the swaying back and forth to the OEM Bridgestone tires. After installing new Cooper AT3...