Recent content by HighTechAddict

Those look great, glad they worked out so well. Do you want to post up the STL files for the mounts as they are or are you OCD and want to tweak that passenger mount before you do? If you do want to tweak it and could use a beta tester, I'd be happy to print up a set and mount them up and give...

Great thread Really nice thread KP Texan, you've done a nice clean install there. Gives me a few ideas for sure. I really like the dash speaker mounts you printed. Any chance of posting up a link to the .STL files for those (and the mic mount) for any of us interested in printing up a set...

Curt 31367 Front Hitch (Denver) $140 I have a Curt 31367 front hitch for sale. Bought it in April, with the intent of using it for a portable hitch mount but ended up getting a winch bumper before I ever hooked up the winch carrier. Used a total of 6 months for occasional bike rack use and as...

3D printed badge Here in Colorado front plates are required, so the dealer who originally sold mine (not to me) solved the lack of a front plate bracket by just running a couple of screws into the plastic just below the grille. Since I got my winch bumper installed and now use a fairlead...

Thanks man, I appreciate the compliment. It was a bit unnerving to pull the brand new bumper out of the box and immediately take the angle grinder to it to make some new holes. :eek: I'm not worried about the winch snobs so much, mostly letting them know to save their breath. I know my...

PM sent.

About time I got this done! I finally got through some of the other backlog of work around the house and got around to getting this bumper set up. I had a 2 row 20" light bar I'm pretty fond of, but C4 only made single row cutouts available, so I went with no cutout and made my own to fit my...

Success on early 5th Gen I got one printed out and mounted in my early 5th Gen ('13 TE) and it's perfect. I hit the edges of the 3M tape with a sharpie so it didn't stick out so much, but I rushed it a bit and will likely do that part over. The lines are perfect and made for a much more...

Don't want to step on geofox784 toes here, but I have a '13 TE and my new 3D printer arrives tomorrow. :bravo: This looks like a pretty easy early print for me to try my hand at and I'll be able to confirm fitment on a pre facelift 5th Gen. Will (hopefully) be able to try it out this weekend...

Neat idea, thanks for sharing the file and making prints available to folks.

That looks fantastic! Glad to see this is actually happening after so many other false starts. Sorry for those that really wanted the bull bar, but I think this clean factory integrated look is just perfect. Nice job C4! :clap2:

Another local offer. I also have a set from my 2013 Trail with KDSS sitting in my garage ready to go. They should bolt right up for you. I'm in CO as well (Front range) PM me an offer if you are interested and none of the others work out for you.

Only had the 33's a little over a month, but no real struggles heading up I70 on a couple of trips so far.

Been there, done that I know exactly where you are coming from as I have a similar history of 3rd/4th/5th gen 4runners over the last few years. About 7 years ago I got a 99 limited and loved it to bits. Kept it mostly stock and kept my off roading to basic fire roads and such, nothing too...

Comes with the territory My worst is this one from rocking it into a tree when climbing a rock. Plenty of pinstripes too My rims are pretty rock rashed as well, my sliders have scuffs on the undersides, all my skidplates are dented, and I crushed my tailpipe so badly that it whistled...