Recent content by jamoc

I've been stuck just like this recently. Air down 12 psi all tires. Grab a shovel, start digging. I mean dig until you are physically unable to dig any further. This will ensure that when a truck, tow truck, or loader does arrive, hopefully, the recovery will be that much easier with far less...

400p no brainer. Buy once, cry once. I love mine, super fast. 400p has the long hose, inline fuse, more robust everything. I've owned the 84p. 84p gets insanely hot, burned my arms a couple times. I know its not the 88p, but they seem similar just glancing at the specs. Now it sits as a backup...

I remember thinking $41.5k was robbery for my 2016 TRD Pro. Sold it for $38k with 60k miles on it.

Thank you -- I appreciate the link!

Why is toyota replacing your fronts under warranty? Whole assembly, or just shocks?

Congrats! That's really good news. Glad I was wrong, now you don't need to cut anything!

The last thing I would do is swap the JBA UCA's. I'd swap the spacer lift to a proper lift, before the UCA's. I would def. get the BMW work done regardless. I think the body mount work will solve your problem Also, for drivability, MPG, etc. I was recommended by multiple people who have...

Also, Have someone drive the truck while you visibly inspect where it's rubbing. That will confirm the rub location. If you like the look of the spacers, I'd keep them. If you're ok with letting them go, def. remove them and do a rub test as well. A BMC will run around a $100 more than the...

I had a ton of rub at not even full lock after installing my JBA UCA, 285/70/17, and Eibach lift. Might sound weird, but without the aftermarket UCA's you might have been in that non rub 'sweet spot' of caster. Adding the UCA might have put you smack dab on the body frame mount. I had a...

Spring compressor. I recommend having your local suspension shop compress and remove the OEM springs, and reinstall the new ones on the shocks. Make sure they face any wording on the springs the way you desire. Sometimes they re-install springs facing the wrong way. They should charge $50-$90...

I had a clunk. Tightened front body mount bolts under carpets on both sides. 2 person job. Problem solved!!

I have 2020 Pro. I installed Eibach 1.6" springs, with 2 Ekstrom Designs shims up front. Total roughly 2.5 inch lift. Rear has load leveling system by Eibach, set nearly at max height - I assume 3 inches (+,-) JBA High Caster UCA - set to -4.3* caster on both sides Wheels are SCS Ray 10, -12...

Hello, Interested in Stock tires. Looking for brand new to almost new, less than 8k miles Located near SF, CA Willing to drive and hour or two. Thank you Pm me

Hello sir, Where are you located? Thank you, Brett 650-483-9618

Beautiful work, very impressive!! Was pinch weld work performed along with the cab relocation work as well?