Recent content by Junior73

  1. J

    knocking sound under the hood

    Take it by your mechanic and have him/her take a look... if its a rod bearing, maybe they cancfix it before you toss it...
  2. J

    Help! When engaging 4 wheel drive i have binding and hesitation?

    I would take it to the dealer, or a toyota mc to have them check it, to replace the actuator you have to split the transfer case... unless you are up for it. Its a little bit more complicated than a basic 4x4 system. It almost sounds to me like its hanging/ not shifting correctly. I have hear...
  3. J

    buying a 4th gen. THIS OR THAT

    When I was looking before I bought my 07, I noticed that they redesigned the middle fold seats, the older design folds flat, and the newer design folds, and flips up... If that matters at all to you... Remote start can be had for $100 dollars, also if you are looking at the v6 and its 4x4 make...
  4. J

    Wires through firewall

    In the past I have used a coat hanger, long piece of stiff wire to locate stuff, might help with fire wall cunundrum...
  5. J

    4Runner + Tree ≠ Fun

    Glad you are ok, wow was expecting alot more damage from the picture it was not bad, interested to see what the shop, and insurance says...
  6. J

    Help deciding on new vehicle - should I?

    If you really like the 4runner keep it, and buy a small cheep car, if you can do maint, etc. a good $10k plus car will depreciate perty fast with lots of miles...
  7. J

    Has anybody used Monroe Quick-Struts

    Quick struts were great, Springs were alot larger than stock, the old ones were really saggy... you def have to un bolt the lower control arm(ball joint), and remove the sway bar up front. Took me about 4 hours to do both back and front, with a few breaks for food and other amenities. I don't...
  8. J

    Rear shock bolt is stuck

    Harbor freight, $20 for 4.5 inch grinder, sazall is about the same... I almost always just cut them off.... and yes I just did my rear shocks so it is possiable to get it in there...
  9. J

    proper way to check transmission fluid level needed

    What part are you confuesed about?
  10. J

    4th gen timing chain question

    It would be interesting to see the link, the v6 was designed not to be rebuilt as the block is aluminum with steel sleeves that cant be replaced. I believe the heads are rebuildable but... don't know about the v8.
  11. J

    Has anybody used Monroe Quick-Struts

    2007 Toyota 4runner sr5 v6 4x4, 171k on the oe shocks and struts, and they are not doing too bad... but have some front end sag, so I went with the quick strut monroes, and monroes in the back.(Install this weekend) I have noticed that most new shocks will ride a little wrough till you add a...

Members online

Forum statistics

Threads
278,309
Messages
3,554,068
Members
248,016
Latest member
Advally Service
Back
Top