Recent content by kquon

I have a set of new OME 890 springs, never installed. $150 local pickup in Orange County, Ca. Can meet at my house in Aliso Viejo or in Santa Ana. Send me a PM and I can reply with pics by email, but itÂ’s pretty obvious what youÂ’re getting. Sold

$50?

Sold

SOLD have a set of front and rear Tundra 5100 Bilsteins. Part numbers 24-188265 (front) and 24-100144 (rear). All 4 are new in the box. $250, West Los Angeles (California). I could also meet in OC depending on the day. Add $25 for shipping.

I just purchased the 90430-12026 crush washers for my 5VZFE and just took my digital calipers to them- they're 16mm OD, 12mm ID and 1mm thick

What is your front hub to fender measurement?

Did you torque the Lca bolts down at ride height? You should be installing them snug while in the air, then lower the car down onto the wheels and torque them to spec when loaded. The lower bushings do not rotate in their sleeves so if you're torquing them while not at ride height, you're...

DK327: your 5 star wheels will definitely fit with the 231 calipers. I have the same setup and there's no rubbing whatsoever.

What I did was cut off the lips of the bushings (inboard side) with a hacksaw all the way around. I then placed the arms sideways on my press and put a socket (whose outside diameter is just smaller than the OD of the bushing) on top of whichever bushing is on the bottom. Then I slid a 3/8...