Recent content by Lollerskates

The 17x9 SCS with -38 offset is going to rub. Mine are wrapped in 295/70/17. Aftermarket UCAs with high caster or adjustable caster will help, also needed to do body mount chop, remove front mudflaps, trim pieces of plastic in front and behind the front wheels. There are plenty of threads...

Passenger side. I went with the 4x4 Labs mount. Don't remember having any issues with the install, haven't had any issues yet. ARB Air compressor bracket for 5th gen 4Runner – 4X4LABS Using PowerTrays on driver side to mount electrical components. Switch-Pros PowerTray > 4Runner/ FJ...

I use pelican cases, a vault v800 and 1750 case. I just throw them up on the gobi and strap them down. Steel cable to loop through the handles and the rack and secure with a hefty bike lock when needed. Easy to set up and remove. Not the most secure, but provides a little big of theft...

I have ray10s in 17x9 -38mm wrapped in BFG KM3's in 295/70/17 I have an aggressive BMC, C4 clearance chop, mud flaps removed, aftermarket UCA (running JBA currently) with just under +4 caster, and the plastic rocker panel trim piece trimmed just slightly to prevent rub. I was able to keep that...

Also run mine without the cover with no issues. Saw some custom covers you can buy online that will allow room for the wire taps, but currently out of stock. Not sure if they plan on making more, or if there are other companies that make them. Extended Fuse Cover - 4Runner - Limited Runs –...

I bought a 10mm rear trim packer thing, running 5100s and t13, driver and passenger side in the rear are within 1/4" for me. Still a little bit off, but a little bit closer Rear Trim Packer for 2003+ 4Runner, 2007+ FJ Cruiser (150PR10)

I bought a 6112 kit and an extra set of 14" 650 lb/in King springs I sold this guy the springs that came with my 6112 kit (14" and 600 lb/in) The OEM TRD Pro bilsteins came with springs are 13" and I think 520 lb/in So combination of taller springs and heavier lb/in rating ended up resulting...

You can get a $250 rebate on the 100-400GM with the Sony Pro event rebate offer they hand out at events. You can buy from any authorized vendor, then get a visa card rebate in the mail from Sony. Not a super slick deal, but better than none. I have a card from overland expo west that expires...

My vote is for C4, love the way it looks. I went with their lo pro front bumper and sliders, and as far as I can tell, quality on their stuff is top notch. Too bad I can't afford the rear bumper :crybaby: starting to sell off some of my other hobby gear to stack some $$

Looking forward to this as well. There's a video of the plate system install on youtube, but I can't find one of the whole low platform sleeping system or whatever it's called. I'm interested in knowing how easy it is to remove the sleeping platforms and reinstall the back seats back in just...

Got my C4 Lo Pro bumper installed, with BD S8 light bar and SB X20 10k winch. Still need to cut off the winch hook and install flatlink and winch rope on to winch, and wire up the light bar. Test drive to the farmer's market, the bumper stayed on and did not fall off!

Correct. 5100s in the rear with stock springs will result in stock height in the rear. Change out the spring or add spacers to change rear lift height. 5100s in the front are slightly height adjustable because of the different perch settings and you are free to choose which perch setting to...

I went to stealership for some OEM parts, stealership in my local area offers veteran discounts on parts, and their sticker prices were the same as online Toyota vendors without the insane shipping costs.

The 6112s do come with the shocks and a pair of 14" 3" ID 600 lb/in springs as part of the kit, and the kit comes with all you technically need to have them installed. You do have to re use some of the hardware on your OEM shocks for part of top plate assembly thing. There are some vendors, I...

Ahh ok I'm in AZ might be a bit too far. By the time shipping is thrown in there, you're probably better off looking for something local