Recent content by Longv

Another option VoltageBoosterPRO

Pull through trim panel off there's room to get the top loose so you can get in there and pull the cable or push down where the rod on the actuator. You'll see a fork coming out of the inner door handle carrier, that needs to go over the rod if you missed it when reinstalling the actuator

Santee, I added some weight and went with different springs. 723 are kdss springs so the passenger side is 10 or 15mm taller.

195 for shipping to socal...

Give it a few days, speakers need to be broken in

HD LCA Frame Brace, 2010+ 4Runner | Marlin Crawler, Inc.

17x8.5 -10 scs ray10 on 285/75/17

I was in stock lower arms at the time. Possibly lol Probably 40mph in the desert, those whoops came out of nowhere lol

At the time dobsinsons 2.5fr 2rear, dirt king upper arms. Ripped out both fender liners, pushed back and bowed out the fenders by the bottom near the door. Bent spindles and/or lower control arms My current set up is fox 2.5 all around, dirt king lower kdss arms, wheelers offroad bumpstops, new...

34s without extended bumpstops will result in this offroading. Red circled part is suppose to be flat. Pinch welds need to be hammered flush also

Tjm just released their rear bumper TJM 081ST37A86ZKIT Rear Bumper with Tire Carrier Toyota 4Runner 2010-2020

Rci makes a filler plate

Ordered one from catunedoffroad.com for 349 got a call a bit later and found out tjm distributer was 10 min away from me so I was able to pick it up and saved on shipping. I'll be installing it this weekend

Can anyone link the group, I cant seem to find it :der:

Try contacting a company like Collision Safety Consultants