Recent content by lukkystrike1

Just as a quick question, what programming did you do post install? This 'virgin' ECU should need to be registered? or was it Plug and Play? JW....:smokin:

Someone on here has that head unit. I was looking through here (t2r.org) when i chose my pioneer. Let me see if i can find anything about it.

To get the airbag light off, the SN of the airbag has to be changed in the system and the ECU re-set. Unless you have access to the proper programmer, this would be a no go. //This knowledge comes from Subaru, but since they share most suppliers this should be true, i used to work in the...

If you get a truck with XM stock, they have an adapter i have used successfully to add the shark fin antenna to a pioneer head unit. Dont have time to read this thread, but why upgrade a truck when for less than 600 bucks you can have a modern head unit with carplay and android auto that uses...

Toyota Teases a Diesel Option For 4Runner [Corrected] It's not a V8, but this is very tempting news. I would be very happy with a 300+tq diesel, especially one that has been used forever in the Hilux! What you all think? Kinda bummed that safety sense will be a required option.... Edit...

I can see 20+ MPG when I keep the ECO bar in the middle and never over that. But Chicago drivers tend to want to hit me, run me off the road, and honk if I do that...so i am stuck with my 17/18mpg. Stop and go traffic we have here tends to kill my mileage too, for about 3mi i run 0-25mph, then...

as long as your referring to the lower tail gate emblems, i think the "4RUNNER" is a bit different than the lower gate and then the side emblems. I am not sure how the 4RUNNER is attached specifically as it seems to have been applied by the supplier of the piece it is attached, it may have pegs...

To remove emblems: 1) use a hair dryer (not a heat gun, if you use a heat gun, be careful not to damage the paint with too much heat, or melt the emblem) to get them hot to the touch. 2) use fishing wire (plastic, try to get a thin gauge) to pull behind the labels. Saw back and forth i used a...

I am glad i have been hesitant to do it. Thank you for the info,

/Real curiosity as I want to do the Undercoat Why would a coating applied to the brake lines mean we should run away? is it that the coatings are no good? or there is some reason why the lines cannot be coated? As my friend who is in his 60's remembers oil coating the bottom of his cars in MI...