Recent content by markls954runner

So i just gotta install the BJ Spacers (however you do that):confused: and then lower/relax the torsion bar (however you do that):confused:?

This is most likely a dumb question but i got these BJ spacers and after i put on my rear springs and front and rear shocks i really only want to raise my front .5-.75 inches so i was wondering if i adjusted my torsion bar somehow can i make it so these spaces only give me .5-.75 inches of lift.

Ok thank you. So the lift will only come from the springs

Ok so the springs will raise the truck about 2" past stock i guess, not really sure thats why im asking here. And back to my main question that i actually need answered, will the combo of shocks and springs raise my runner anymore than just springs? Help is much appreciated.

So you can install OME springs with the stock shocks and still get lift without any problems? And that feedback after a trip would be much appreciated

If i put OME900 springs and skyjacker 0-2" lift shocks in the rear of a 95 4runner will it raise the back 2" or more than that because of the springs? This is probably a really stupid question but the im not sure how far the OME springs raise the 4runner and i want to make sure that whatever i...

Thanks, are they not too stiff for you?

That looks really good and i am thinking about doing the same thing so i was wondering what rate spring did you go with, the 900 medium or the 901 heavy duty?

Ok well this kit is my newest of an ever-changing list: Sdori 1.5" Ball Joint Spacers OME 901HD Coil Springs OME N98 Front Shocks OME N72F Rear Shocks The only problem is that i need to get this complete kit for around $500-550. So if anyone knows of some good discount site or some good used...

Hahaha thanks Thurlo 76 for ALL the posts. So you think that i will be okay with the spacers, springs, and shocks? Or do i need to get longer shocks since i will be sitting above stock height? And fourwd1 I have read a lot about the complete OME suspensions but i am looking for a little...

So I've been looking around a lot and have figured out what the majority of the people in my situation do, and found a site where a guy did exactly what i want to do so i know it has been done before. This is what I am thinking of putting on my 95 4runner: Rear Springs BJ Spacers Front...

OK that helps a lot. Its always better to understand WHY something happens rather than just knowing it happens. So the torsion bar that comes with the second kit isn't really needed, it's more for replacing an old one? And also would i need the front springs that come in the 2nd kit or are...

I am looking to level out all four corners and get some lift at the same time. So Fourwd1 will i need the 2nd kit to raise the front or can i adjust my stock t-bars to make the front equal to the new back springs? Basically, will the 1st kit make all the corners equal and give me lift or will...

First off thank you and second off what is all the other stuff for, is it just a more serious lift or are those parts that will last longer or something like that?

I know OME lifts are an old topic and i have done my research but my question is can i just buy THIS KIT to level my 4runner, and maybe lift it a little :naughty:. Or do i have to buy the torsion bar, front shocks, rear shocks, rear springs, and the steering damper seen HERE.