Recent content by Matt831

SSR-623-40 | SumoSprings Rear Suspension

I used rubber washers from Lowes, silent ever since. Cost was around $2.

If it were me, gear oil is cheap. Do another drain and fill for piece of mind.

Any idea if the actuator would be a 5 year power train warranty item?

Thanks guys. The breather tube is very taught, I also noticed a small tear in the tube around the nipple on the ADD so I am not sure if the ADD has been contaminated with water, etc. All the videos I found were for Tacomas and no one dropped the diff but one guy dropped the diff on a 4th gen...

Is it necessary to drop the front diff or can all the bolts be accessed and the ADD removed with the diff in place? Thank you, Matt

Isn't the coolant scheduled at 100k in the manual?

I run my fridge with a Jackery 500 plugged into the 12V in the back. The Jackery charges when the truck is running and passes through to the fridge. When the truck is off, the Jackery runs the fridge. I can get about two says of runtime off a fully charged Jackery 500 and my fridge. I also...

I did not look through this entire thread to see what folks are using. I tried various cans but have stuck with Scepter Military Cans from Canada. They never leak. They are pricey but you get what you pay for. I usually strap two to the roof rack when needed Cans New Scepter Olive Drab...

I would never put them on a vehicle that sees off road duty. Do some searching and you will see mostly negative comments when you mix off road and drilled/slotted rotors. If you want more stopping power, you need bigger brakes but the brakes on the 4Runner are pretty good in my opinion.

Are you referring to the physical frame of the truck being bent or the plastic bumper cover being damaged? The plastic covers are not structural at all and are an easy replacement. I recently hit a turkey at about 70 on the freeway. When all was said and done the total bill was about $3600...

Michelin Defenders or LTX AT2

I would keep it just from a cooling perspective.

Thank you. I had never known the exact reason after reading through a bunch of threads about it.

What is the purpose of the foam seal down there?