Recent content by maxvert

Snorkel Stickers I need a few of his stickers for my snorkel . Would you pm me his PayPal address . Thanks Max

Ready to Buy Damn I missed both sales . I'm ready to pull the trigger on a rack for my 3rd gen . How long is the wait time for a powder coated full length unit with the light bar ? Any discounts available for T4R members ? Max

Sent payment , good effort ! maxvert

My guys old, experienced and retired . Does good work when I've figured out the parts and what needs rebuilding. Oh he's $ 25 and hour . Max

Napa Calipers with every thing else , rotors, pads and shims OEM . I've got around 20,000 miles on this configuration with lots of mountain driving and they are still awesome . Max

Would anyone know these bolts size and grade . I'd consider upgrading to a stronger bolt. . Broken bolts are unacceptable . Max

Thought my LTD was running a bit hot 200 with trans at 175 + so checked to see if the jiggle valve was at 6 which it was . Flushed and filled the system and properly burped it , parked front uphill about 10 degrees . Now it runs at 190+ and the trans is around 165 . Max

I doubt the 99 talls on the rear will get you more then 1" additional height . My 2000 ltd went from 20" to 21" with the 99's front and rear . I installed air bags to help when hauling my dirt bike on a hitch carrier . That worked fine. Max

I just removed a set of Moog '99 talls from my truck . They raised it about 1" from 20" to 21" . Used Bilstein 4600's on the front and 5100's in the back with airbags . The setup worked fine for my stock rig with a dirt bike on a hitch hauler . Nice on the highway and worked off road ...

While you r in there do the ubj's and tie rod ends, that's what I just did . I'd recommend using OEM parts . I'd had some moog lbj's installed last year while doing an interim front suspension build ( 99 coils and bilsteins ) . Pulled the whole front suspension apart a few weeks ago to do...

I've installed the Tundra 6112's on my 2000 ltd with the full Shrockworks suite of iron and a winch . Set at #3 slot right and #4 left . Settled out at 2 3/8 " which was just where I wanted it. I think they are perfect for my needs. Handles the extra weight well . Combined with the OME 891's...

Same here, I need the longer ones . OME 891's in the rear . Now for the fronts . Max

Looks like the rears are a go ! Perfect timing for me, as I've just completed rebuilding my front and rear suspension. Only needing front and rear bumpstops to work with my Tundra Bilstein 6112 2.5" front and OME 891 Tokico rear lift . Max

In for a set front and rear . Nice work. Max