Recent content by Midnight Anvil

FS: Salex Console Divider and Tray (5th Gen) $15 Each or $25 for both. Local (Austin, TX area) preferred, not enough money in these to really justify shipping. Both are in excellent condition.

Do you have any kind of a sway bar drop? When I did The Giz 's install we also did Total Chaos upper control arms but I can't remember if it was the OMEs or the UCAs that included the drop kit. Didn't seem to have any clearance issues.

Like the others have said, lift/stiffer coils first. Adding that much sprung weight in front of the axle will cause the front end to sag which will in turn degrade the overall damping ability of the shocks and likely degrade the handling characteristics of the vehicle.

So I just happened to run into the same sales manager a moment ago. He said he got the information regarding the 4Runner and TRD Pro 4Runner from an instructor when he went to factory training recently. The CH-R and Murai FCV saved the 4Runner by bringing the entire lineup back into spec for...

Okay, then for everyone's benefit, please provide evidence to the contrary. I don't have an issue being told that what I posted is not correct, but please provide the reason as to why it is not correct. I was only repeating what I was told by my sales manager. Information is always being updated...

I know I was pretty upset when the "TRD Pro exclusive" Quicksand I couldn't have on my SR5 4R was suddenly a "standard" color on SR5 Tacomas of the same model year. I won't be surprised if the same happens with Cement.

Saw your post about 20mm preload, so I guess the advisor may have forgotten to tell you that I was able to get the adjustment done and they are in fact at max preload. Of course if anyone has any questions about the installation, let me know.

These are the ones I installed for you, right?

Just opened May 1st. Like rob97ag said, on 183 A feeder opposite (east side) the HEB center between New Hope and Crystal Falls.

Its possible they may go unibody given that the only other competition for it that is still BoF is the Wrangler. The reasoning I was given on the redesign being pushed to 2020 was that since there was no expectation of a 2018/6th Gen 4Runner, they have to run with the current platform/design...

Cross posting since it seems relevant here: TL;DR - No TRD Pro for 2018 but 4runner in current from until 2020

Couple things since you're in Cedar Park: Direct from our sales manager in conversation regarding trading up on my '16 SR5: Toyota of Cedar Park will be getting ONE of EACH TRD Pro model in EACH color in appx 30 days. He said 45 days about 2 weeks ago so probably closer to 30 days now. He...

I feel like that's what these are for... PM'd

I'm a die hard Toyota fan and always have been. Thus the Wrangler was immediately eliminated. Not to mention having been a mechanic I'm generally not a fan of modern Chrysler products. Having driven FJs as a Toyota Tech, the blind spots caused by the c-pillar are horrible. The blind spots on the...

Super Bright LEDs has them for about $5. Probable safer than Ebay LED Light Load Resistor Kit - LED Turn Signal Hyper Flash & Warning Fix