Recent content by Mikep.

I no longer have the headlights. Sorry.

Yes the Harness is still available.

pm'd

Finally got around to some lighting mods I have been putting off for way too long. I put in an underhood light that actually works a lot better than expected. (Sorry no night pictures) I also installed a rear fuse block behind the drivers tail light. I also installed auxiliary reverse lights...

I put in 2004 4runner in there drop down menu's.

I would recommend going the kick panel route. Like these: https://www.qlogicenclosures.com/collections/q-logic-enclosures/4runner+toyota+2003 There actually are several benefits of having the speakers mounted in the kick panels to begin with. In all honesty, running door speakers are really...

Essentially, you are taking positive from one speaker and negative from the other speaker (stereo), which would give you a mono signal for your center channel. The crossover would go in series on the positive line into the center channel and is meant to filter out certain frequencies for your...

This is rustoleum hammered grey, the center caps are plastidipped and the "T"'s painted silver. I have the same wheel/tire combo on my tundra too.

I have a 285/70/17 installed under my truck. It is not brand new, but it is inflated to 35psi. I have a v8, but mine cam with the smaller hitch.

trac off switch What color is the black light on the traction off switch? Does it come with a harness? Thanks.

Bring the family along!

I bought a used tire off ebay that had 9/32 tread left, it is a nitto grappler and it is fully inflated.

5100's with Moog FJ set to second notch with a daystar 1.5 in the rear. The tires are just under 33" cooper at3 in 285/70/17. I had 265 70 on before so I moved the liners forward then. All I did was to remove the front mud flaps when I made the jump to 285 70.

Mounted some 285's. Didn't need a BMC and was even able to fit a full size spare underneath.

Ok great! Thank you