Recent content by mkaye

i had finally had time to drop it off at my mechanic death wobble seems to be fixed (upper & lower rear control arms, new bushings in panhard) mark

ordered the 4 arms from rockauto ordered bushings for the panhard bar mechanic is getting new bolts hopefully all this will fix the 'death' wobble

my mechanic is leery of the urethane bushings - squeaking whiteline supplies grease to alleviate that I have already sunk $3500 into this & some other problems since the rough road trip in Oct for my 1999 I am definitely looking for the cheapest solution to get rid of the wobble not sure that...

i'm trying to keep the cost down it is 20 yrs old... here are pics of my bushings mark

found this link Death Wobble Cures - How To Fix Death Wobble on Jeep, Dodge, and Ford – KevinsOffroad.com / Overland-Ready.com when I replace the bushings do I need to press the originals out? mark

I just crawled under to have a look the panhard bushings do not look bad - I can't wiggle anything the trailing arm bushings look bad - bits of rubber sticking out from under the arm, no shoulder on the bushing, quite a gap between arm & the frame holder I am assuming that the bushings...

I definitely have a wobble problem - 1999 SR5 260k km came back from hunting last Oct, hit the highway after 60 mi of bush road (3 1 /2 hrs) and got up to 50 mph and couldn't control it the entire body started a wave pattern and the oscillation just got worse slowing down below 50mph was OK...