Recent content by MotherPrometheus

What was the solution?

I have an 04 V8 sport. My heat is blowing hot on the passengers side and cold on the drivers side. I don't have a duel temp and my blend door actuator under my glove box seems to be working properly. I checked where the drivers side would be if dual climate and no actuator there. I did hear some...

Update So after further testing, it appears to be either a bad battery or bad alternator. I jump started it and it ran fine with the cables connected. Once I disconnect the cables it started beeping within minutes and shut off again.

So I'm at a total loss. May need some help with this one... I have a 2004 V8 Sport and yesterday It beeped at me a few times then stalled out. After a few minutes it started just to go a couple miles, beep a few times and stall out again. each time I start it up and it stalls, it takes longer to...

fJ Springs with Bilsteins 5100 So Im in the process of installing FJ Springs with Bilstein 5100 Shocks. I've set the Bilsteins at 1.75 and now the springs are so compressed I cant jack up the control arm, the springs don't want to compress any more and when trying to jack up my lower control...

New bearings and dust shield Im in the process of swapping out my front bearings. The new bearings im installing are pre-pressed assembly. In know the old dust shield is pressed into the assembly. Will I be able to replace the dust shield since the new assembly is already pressed. Also I...

I pulled my springs and shocks from my 04 V8 Sport and my top hats are rusted and seized to the frame. Has anyone had this happen or have suggestions on how to remove it?

JBA Wheel Space I just ordered a set of JBA UCA's. I have 265/70/17 with stock wheels and no spacers. Will I need to purchase a set of 1.25" spacers?

Where to find OEM Lower Control Arm Does anyone have an online source they like for buying OEM LCA's?

OEM LCA's with Bilstein 1 1/2" lift I plan on installing Bilstein 5100 shocks and my LCA's need replaced. I'm going with 1 1/2" lift with the Bilsteins. Would OEM LCA's work for that height?