Recent content by munkel

You would have to check with him, here is his email. [email protected]

I would just go here: Anytime Backup Camera He may not respond anytime soon on this forum.

email inbound

Hey Doug, I had the old style aluminum plate mounts with stainless studs and steel knurled nuts that threaded on. I just drilled two holes in each plate and ran a big bolt through and used a big washer and nut on the bottom. Was a pain to tighten the nuts though. After a few years the mounts...

If you’ve ever wanted rock lights to come on with your puddle lights this is the kit for you. Available now for 30% off at DomeRock V4 Bundles – DSIM Solutions Only one wire to connect to trigger on rock lights. Also available for tacos. Check them out and give Tacoma_dsim a follow on IG...

Mine is a 27" from apexoverland.com, bunch more angles here.

looks good, which bar did you order? thinking of getting a 27" for there, has 3 more white led's.

Thanks, did you use the other pieces in the kit or just the filler ring thing?

rig is looking great! does the pocket kit still allow you to aim the lights? thanks!

Thanks for the help! Much appreciated.

Thanks! So If I am understanding correctly, you will still need to turn on the rear switch and then the front switch to get front cam though correct? That's what I just tested and I can't get front to work without turning on rear first. Thanks again!

Is there any way to make this work with two spst switches where you have one switch for front cam and one switch for rear cam? Thanks!

UPDATE: front cam is working when I flip the switch but front cam also comes on in reverse and I can't figure out what to run to reverse switch in dash. Thanks!

OK, so I have front and rear cam, aux video input cable, rear camera override harness and 2 single throw switches. Which two wires get run to the two switches? I have the black dual wire loom running down there but I thought one of those wires was for 12V?

thanks, I got some reading to do for sure....