Recent content by Ohhh S.k. CFPB

i get minor rubbing at full lock with 265/70/17 BGF ATK02

sounds like they may have not go the transmission up to temp if they only did a drain and fill.

the last couple times the tech just used the sniffer and obd check in south orange county

what radio did you install? I have noticed if you have the JBL and get the dash kit you usally have to cut the top or bottom of the kit in order to fit the alpine or pioneer 7in displays. Looking at this kit you have to modify/cut if you use one of those bigger touch display models

depending on the speaker adaptor you get, but i was able to install some image dynamics cxs chameleon in the front and rear and still had plenty of space left. i believe they are about 3in top mount depth.

I was thinking about going with the setup thinking that the 5100 rode pretty well. But now im leaning more towards the toytec boss kits and going with progressive set up

MojaveMadMan have any tips on removing those bumper bolts or do you know the thread pitch on the the bumper bolts?

Jason B do they offer a single side exit for the v8?

think you need to remove the swaybar end link from the spindle to let the arm droop, make sure you loose/remove the break/abs sensor that is attached on the UCA then you should be able to hit/pry it with a hammer

powder graphite is still the preferred method for lubricating locks, oil base will attract dust making it gummy i would double check just to make sure

i have the same issue as well. i could not find anything on the forums or online for a fix.

if you havent already renamed the software distribution folder, use method 10 https://support.microsoft.com/en-us/kb/2509997 restart and download the https://support.microsoft.com/en-us/kb/3102810 standalone update

i am 90% sure they do not come with a spigot/filler adapter.

if you want to buy 4 legit NATO cans head over to the SOE website.set of four Jerry cans / Nato jerry cans | Special Operations Equipment make sure you read the instructions carefully or you might end up on youtube.

put me down for a 4th gen driver side