Recent content by Ozsomeness

Yes, all were greased well. In fact, I changed them all out because I thought this was the initial problem

So I removed the rear driveshaft and the noise was still there. I proceeded to drain the transmission fluid and drop the pan to see if I can pinpoint the noise. As soon as I dropped the pan, I spun the shaft where the driveshaft connects to on the transmission and the noise was gone. I changed...

Here is the link to the short I uploaded of the noise I am hearing: https://www.youtube.com/watch?si=0gkueeDslBpugJMt&v=uR480tBgmF4&feature=youtu.be

So I started hearing a noise coming from the transmission area. At first I thought u joint, but I replaced them all and the noise is still there. I have a video and will post but I haven't been able to find anything on this. Any thoughts?

Good afternoon, everyone, I have a 1994 4runner, 2wd, v6, 3.0. it has a ticking noise when accelerating over 2000 rpm. Once I stop accelerating, it goes away but then comes back when I am accelerating. I thought it could be the injectors, so I rebuilt them, and the same noise is still there...

I think that is the issue I am running into. I do not know which is which.... :(

On the 1994 4runner 3.0, does anyone know the intake/exahust value sequence for the driver side? does it go intake, exhaust; intake, exhuast ; intake,exhuast. I am trying to check the clearance of the shims and want to make sure they are within spec

Valve sequence On the 1994 4runner 3.0, does anyone know the intake/exahust value sequence for the driver side? does it go intake, exhaust; intake, exhuast ; intake,exhuast. I am trying to check the clearance of the shims and want to make sure they are within spec

How many cam plugs are on a 95 tacoma, 3.4 l? Are there 1 on the rear and one in the front? And also, are there 2 half moons on each side?

Hi *everyone, Im new and was just wanting alittle help. I have a 2001 4 runneer, 3.4 v6..I am.wanting to change all pulleys and tensioners since I will be having the water pump done this weekend..how many does it have? Does it have 3 pulleys and 1 tensioner? I'm not a mechanic but I'm learning...