Recent content by PAYNE

Navigation issues after warranty airbag replacement I wonder if any of you have heard of this issue. After having the recalled airbag replaced in my '11 Limited I noticed that I could not enter the service into the maintenance area on the nav/radio because it kept saying that "the date you've...

4th gen 17" wheels for sale Not sure if there would be any interest here except for a pretty cheap set of wheels. These are factory 5 spoke 17X7.5" wheels off of an '09 4Runner. They do have a set of Bridgestone Dueler H/T tires in 265/65R17 but they are almost to the wear bars so the value...

Factory 4th Gen 17" wheels for sale These are a set of four wheels & tires off of a 2009 4Runner. They are 17X7.5 with a machined aluminum finish (factory finish). The tires that are on them are Bridgestone Dueler H/T 265/65R17 but to be honest they are almost to the bars so the only real...

I echo that. I haven't pulled a '14 yet but I'm 99% certain that you will need to at least pull away that side of the bumper cover in order to get to the bolt that goes from the fender into headlamp. This photo is of a wrecked '11 but the basic design will be the same. You will notice that...

Cleaning it is a good place to start. The other thing I would do is take a good look at the rubber/felt run channel & make sure that the window hasn't jumped out and is running on the metal instead (pretty common issue). It can also do this on the section of felt that is inside the door so if...

Yes your correct, the passenger side front door handle will lock & unlock the doors with the smart key feature. I'm pretty certain that you could find that in the owners manual so that you could arm yourself with something in writing for the next time you go back in there. Good luck with your...

The I-CAR term for that is "solid foam energy absorbing block" or also known as "set-in position foam" which is there for collision energy absorbing purposes. For those of you who follow NASCAR you know that the sides of the cars have this stuff all in them as well as the new "safer barriers"...

Great pics, very jealous about your trip. I've never driven any further west than Little Rock on a 24hour bonsai run to pickup a car for a buddy of mine.

For the parts diagram that I have for a Limited model the body color painted mirror cover is part# 879450E020 and is supplied pre-painted for $53.90. The flat black area around the mirror is in fact part of the assembly for $224.80. Hopefully that helps a little.

I went with the OEM all weather mats & I think they work just fine so I wouldn't be too worried about that. My first steps were pretty much in line with what you have suggested short of the sub. I also purchase a hitch hauler basket as well as a Yakima Load Warrior for expansion room but of...

I went out & took some photos of this type of bracket & bumper cover mounting slots in order to show the details a little better. Please note, this is not photos of the 4Runner bracket but it is the same style so this should help in the understanding of how it works. You can see that there are...

Here is a diagram from Alldata of the bracket in that area. I'ts not a very good diagram so I'll tell you that this plastic bracket that creates a shelf for the bumper cover to sit on and it has small "fingers" that the small slits of the bumper cover snap over. I have in the past seen the...

Ok got the answer thanks to the T4R board & Bridgestone website. Factory 20's are said to be 39lbs & the factory Bridgestone tire is said to be 36lbs giving a total of 75lbs. After adding up my totals I am running on 74.4lbs so that makes me feel good (hadn't done the math till now but happy...

The overall diameter was 1" taller than factory which I though would be enough for what we use it for and not too much that would throw off my speedo. In addition to the speedo I also didn't want to change the ratio to the point where I would have incorrect shift points therefore lugging it...

We have an account with Tire Rack so I ordered them from there. They have a lot of different choices but I went with Enkie knowing they make many of the factory wheels for Toyota, Honda, etc. I wanted machined aluminum with clear coat so I wouldn't be fighting the polish fight or having to...