Recent content by Predatorhouse

Hey, I see you have lights in the little piece under your headlights. I got a few ??? I’m assuming that they are LED, how did you wire them? I was going to put some white ones there and make them parking/DRL, and put my turn signal where the OEM parking light is. Any special fuse or resistor...

Think about putting bed liner on it so it matches your fender flares. other than that I jealous, dad's are awesome.

Go to a fablic store and get some fake leather, it is cheap and you can get it in many different colors to match or change the look with a different color. 1 yard will be more than enough pull the old ones off and use them as a template cut fake leather and glue new pieces on doors you can get...

if you have to fab up some mounts it isn't that hard as long as you have a drill and a jig saw. Use MDM board, its cheap and will do a good job. You can get it at home depot or what ever company you go to, its in the lumber department. and think about some type of sub. I mounted a shallow mount...

The skid plate is real thin so I wouldn't be concerned with that being the noise unless its missing bolts, you can always take it off and drive it for a few days. You can even take the sway bar off as well its not going to hurt your vehicle, some guys ride without it for the xtra flex. I...

Sorry I didn't click on the link but yes and the first pic on their shows the parisitic boxes that i was talking about, you can replace that section with a large piece of pipe.

A ram Air or cold or cold air intake. Like I said you can also do the ISR mod it deletes the parisitic boxes on the factory intake. Also some people put a marine cover on the forward facing side of the air filter box to force more air in their intake wile driving. You have to cut a hole in the...

My rear seats started to rattle once I just broke out the ratchet and tightened all the nuts down and never had the problem again, you could also use some loctite on the nuts so they don't back off.

I think I know what you are talking about and I think its the heat shield on the headers. I put a intake on my taco and 4runner because they both did it exactly in the MPH range on highway like you stated, and the rattle went away. My thoughts is the motor isn't working so hard to breath after...

If any of thre screws you put in the speaker holes are touching metal on the back side your speakers will not work. I had this problem.

Hey guys the rear door mount that is on our doors is just a flat peice of plastic wit a mount made on it, you can take it off and trace it on a piece of mdm board and then cut a ring out of mdm board for the 6.5 and place it any where on there so the door panel goes back together. So that way...

I got 5.25 to fit just fine in my rears by making my on plate and ring out of MDF

Im pretty sure I can't really see why they would change, but car companys do strange things to get more money out of us.

your front doors are 6.5 and the rears are 5.25 the tweeters I think are 1.25. The rear doors you can fit shallow mount 6.5 but you will need to fab a new plate and ring out of wood or MDF. Its not hard you will need a jig saw to do it though and play around with the position, more forward and...

you could always go to a car sticker place and have them make some stickers for them.