Recent content by pwa_fcva

I don't know about the 98, but on the 04 you just disconnect the arm on the glovebox so it can drop and the filter compartment is behind the glovebox. Might be the same, dunno.

My bad... I assumed the preload was .5 like mine.

I believe the top-out spacer lift is equal to the size of the spacer while the preload is double. So .5 preload and 7/8 top-out should put you right around 2". I ended up with 1.25 lift with my .5 preload spacer so you may be around 2 1/8 when done. But I could be wrong.

Here is my simplistic take on it. A preload spacer mounts between the spring and the top plate. This essentially reduces the space where the spring sits by the thickness of the spacer. This causes more force on the spring (load) and pushes the vehicle up to counteract the additional force. A...

Figures.... today when i go back to the link I posted the advertisment at the bottom is not broken and no double-click to go back. Guess there is one bad ad banner that when it hits, manifests the double-click. Either way i can live with it.

It's fixed! Using IE7 on my laptop right now and no double-click! SCRATCH THAT.... but i do notice the same thing Sharp noticed. It only happens on threads that have a broken advertsing link at the bottom. Threads that show all the advertising links work correctly. This thread has the...

Definitely still happens with IE7. Does not happen with Firefox.

There is a ton of good info on this board regarding spacer lifts. I found T4R.org when I did a google search looking to level my '04. After reading every thread on here about lifts I went with the Cornfed front leveling kit which is actually a 1/2" pre-load spacer. It gave me 1.25" of lift...

Re: replies I do not notice any change in sound with the resonator off, but I still have the stock muffler. P

Hey T4Rsoldier04, My T4R looks much like yours. I have not uploaded any new pics but I recently installed the Cornfed front leveling kit. Definitely love the more level stance. I would not say it is perfectly level, but it is so close you can barely tell it has about a 3/4" rake. You can...

Maybe you got one that slipped through QC at Mito and had a shorter than normal wire. I actually ended up with about 4" left over that I had to wire tie under the dash. Once I got to the bottom of the A-pillar I taped the wire to a wrench and dropped it through the dash and came out directly...

I have seen several discussions on the 2006 SE tubular roof rack and I think some have questioned if it would fit on other years. Search and searched but can't seem to find the answer. I have a 2004 SE. Can't imagine the roof or mounting system is different for a 2006. Anyone know for sure...

Wanted to add to this thread since i just finished installing my gentex mirror and the brown/red wire is there in position A9. Problem is you cannot see A9. looking straight on the connector it is lower left corner. I pulled back some of the electrical tape to make it easier to find and tap...

Hi all. Been reading all the threads on the Cornfed 1" front lift for weeks now and decided to purchase one. Not sure I want to attempt the install myself and was wondering if anyone here is from the Northern Virginia area and knows of a good shop that could do the install for me. Thanks. - Paul