Recent content by pwood

I recently swapped out the stock grille for a custom one, and after reinstalling everything, noticed a little crack in the assembly. It has now gone all the way through, I've tried to patch it a little, but it just looks bad. Looking to find that part and likely replace, but I can only find the...

Uhhh....so *that* did not go as expected. Finally got it installed on my 2010 SR5. The holes that the stock plate used weren't the same as those that the TRD plate uses. I ended up using the M10 bolts that came with the plate. Tapped out the rear holes (which weren't even being used at all...

Finally got my factory plate off tonight. My 4runner is a 2010 and came from Chicago, and the threads in the front two are fairly corroded so I definitely need to tap those. The rear are fine, but I have a question around bolt length. Kistle mentioned 20mm, that looks like what the...

Took of the air dam and plastic below bumper tonight, but I think I went overboard. From the looks of it, the two small plastic side pieces should still be on. And for the center piece, only the part that hangs down should be removed, otherwise it's totally open under there. Is my thinking...

Just tried to do this on my 2010 SR5, and after looking at it, I'm not totally sure how the plate fits. I'm a total noob at this, but how do I even get the OEM plate off? Can't even see the bolt under there anywhere. The TRD skid plate will fit the 2010, yes?

Looking at these for my 2010 SR5, seems to be the best deal I've been able to find. https://parts.olathetoyota.com/oem-parts/toyota-trd-17-in-matte-black-alloy-wheel-ptr2035110bk But it says that they don't fit anything older than 2013. For a 5th gen, I don't believe anything has changed with...

Based on the info in this thread, there shouldn't be any problems with rubbing. http://www.toyota-4runner.org/5th-gen-t4rs/156378-going-bigger-5th-gen-tire-fitment-guide.html#post1550444 I guess my question is more in relation to the 9" width as I believe stock is 7.5". Any insight there? I...

Just ordered a set of 18" Helo's for my 2010 SR5. I looked at the tire size thread and am trying to figure out if I should just stick with 17". Any help is appreciated! I'm planning to run 275/65/18's, so I don't think there should be any rubbing, I'll probably lift it 1" just for a bit more...

Brand new owner of a 2010 SR5, stock 17" wheels. Trying to figure out if I want to buy 17" or 18" wheels? What's the largest wheel I can fit without getting a lift. (I may put a spacer in to give me an extra 1" of clearance. Or, should I get 18" wheels and a larger tire as well? Don't want a...

Hey everyone...finally part of the Toyota fam! Super excited! Picked up a 2010 Black SR5, it's pretty stock, wondering what I should upgrade first. I already have a grill on the way, and looking at wheels, which is where I have a question. If I go with 17" wheels, which is standard, can I put...

Just bought my first, too. 2010 SR5 with 85k miles.

Working towards 15, too! Too many questions.

Love the wheels!