the front end sway is the worst over bumps at about 60mph the bushings all seam fine the steeringrack may be leaking but there is a slight oil leak from the valve cover so its hard to tell and all the ends look fine as far as i can tell. (no slack, not dry)
just the front end sways at speed. No vibration RWD and yes outer tie rod.
the rear axel tube on the old was bent. iv had the rear checked and was told it is true (rear end was purchased from salvage and rebuilt)
the springs and shocks are still very stiff and settle quickly, but the sway bar ends where the ball joints connect to the frame are all firm and have no play pluse the bushings on the sway bar are still intact
I just bought and fixed a 97 4runner limited that had a bent rear end. After replacing the rear end and getting on the road i relised any speed over 60mph the front end (upon any change in road level or direction) the vehicles front end sways bad left to right. Iv replaced one bad upper tie rod...
