Recent content by rjb75

Just changed mine today-the write up is spot on. Instead of trying to get the door lock cylinder rod aligned properly, I made sure the rod for the outside handle was in properly and removed the lock cylinder to align it once everything else was back together. Made it very straight forward.

I did see that on your website, just wasn't sure if there were any options w/o any lift at all. Thanks for the info.

I have a bone stock 2016 4wd SR5 w/244k on it that is used 99.999% of the time on interstates, do you offer any combos that won't lift the truck at all? I want to minimize nose dive w/o increasing ride height. Thanks

I'll take it-PM sent

What I just said about too much current draw seems wrong, they are only supposed to draw 9.3 watts. Stock halogens draw 19 watts so definitely need to check them out further.

I suspect that the LED fogs are drawing too much current for the factory circuit. I rarely use them but did leave them on for an extended amount of days due to crappy weather, running them during the day and at night. They are off 98% of the time so I believe that's the issue. I plan on...

Ok so I’m a dumbass-the fuse was blown. Apparently trying to visually check a fuse’s condition in the dark with a cell phone flashlight without your glasses isn’t the best way to do things. Popped in a new fuse and all is well.

Yes, the LED fog light bulbs were installed at the same time the HIDs were, they have worked fine for 2 years. I have not tried to put the stock bulbs back in as of yet but will try it. I figured I was going to have to start backtracing the harnesses to find the issue but was hoping there was...

I have a 2016 SR5 and the fog lights aren't working. The switch is on, the indicator light on the dash is on and I can hear the fog light relay clicking when I turn the switch on and off. Here are the electrical mods I have, all are plug and play: - Xenon Depot HID low beams-installed 2 years...

Ok thanks anyway-GLWS

Bump-still looking for one of these

What are the specs on the RAM? Are you willing to part out?

If you decide to ship, hit me up. I can send you a shipping label for UPS or FedEx and all you'd have to do is slap on the label and drop it off.

That's possible I suppose-I'll take a look to see if anything's loose in that area.

Let's see if everyone can hear it better in this clip: Engine noise # 3