Recent content by sakoluvr

  1. S

    Vacuum hoses; need to replace.

    Ha! I am the original poster and the hoses are still in my 97. I also have a 2001 and 2002 sport that are running the same hoses.
  2. S

    Need to replace glove box latch and lock

    Ok, had to remove the glove box. The latch is held on with 2 self tapping screws from the back of the glove box. A PITA for a simple latch replacement. The lock itself can be removed from the front once the lock cover is taken off. Another engineering marvel. That is all.
  3. S

    Need to replace glove box latch and lock

    Thanks for the reply! It is the latch / lock that is broken. Thinking I may have to remove the glove box to see how it is attached from the back.
  4. S

    Need to replace glove box latch and lock

    Surely someone has replaced the latch!
  5. S

    Need to replace glove box latch and lock

    So I have 3 new parts. The latch, the cylinder lock/keys and the plastic surround that goes in front of the cylinder and holds it in place. I can see the tabs that hold the plastic surround in and thus the cylinder. The latch may need to be pulled forward some way to release it. No obvious...
  6. S

    Glove box lock defeated in seconds...

    Any help appreciated
  7. S

    Glove box lock defeated in seconds...

    Can you explain how to remove the latch and lock assembly? Cannot figure it out. Thanks!
  8. S

    Need to replace glove box latch and lock

    Anybody else?
  9. S

    Need to replace glove box latch and lock

    Thanks! Unfortunately it did not address the latch itself. I have three 3rd gens sitting in the driveway that are used as daily drivers. The 2016 5th gen is the one 4runner that I don't have a factory manual for. Anybody here that had to replace the latch or lock on their 5th gen?? I did...
  10. S

    Need to replace glove box latch and lock

    I was returning home from a 2 day road trip cross country and realized that I couldn't unlock my glove box. I put a few things in there and locked it up. While my wife was driving, I ended up breaking the latch. I can open the box now by pushing in on the release with my finger. I destroyed...
  11. S

    Glove box lock defeated in seconds...

    Can someone tell me how to remove and replace the latch. It looks like there might be locking tabs to hold it in place? I will need to buy a new cylinder lock too. Thanks!! The latch part # 5556035010CO The lock part # is 6905642100
  12. S

    Glove box lock defeated in seconds...

    Can someone tell me how to remove and replace the latch. I will need to by a new cylinder lock too. Thanks!!
  13. S

    Installed: Rola low-profile mounts on 5th Gen

    For those that are interested in buying the rack, there is a seller on EBay that has them for $99.99 but you pay shipping. Seller is tinavontease. They do have local pick-up. Business is in PA. For me, it was less than $150.00 shipped. They sell the extension too, but their package for both...
  14. S

    Installed: Rola low-profile mounts on 5th Gen

    Did you paint it first with bedliner?
  15. S

    Installed: Rola low-profile mounts on 5th Gen

    Old thread, but how are these racks holding up? 169.00 at Amazon but another 105.00 for the extension! $366 at Auto Anything!!!!! That is a big change from the original post! ROLA Vortex Roof Rack - Free Shipping on ROLA Vortex Roof Cargo Basket | AutoAnything™

Members online

No members online now.

Forum statistics

Threads
278,312
Messages
3,554,083
Members
248,016
Latest member
Advally Service
Back
Top