Recent content by SCHUNTER1969

I want this!!!! Where can I buy this

Install a flowmaster 40 series!!! I have been running a 40 for 7 years and it still sounds awesome.

It's definitely a stiff ride but once you break them in its really not that bad. When you are sitting that tall and running 35's smooth ride is not the intention. When I did the lift I also installed new NAPA CV's and in about 2 months the boots ripped. I installed high angle CV boots and 14...

Highest setting and here are pictures

Thanks, Hydraulic Supply Co. in Columbia, SC.

Seized rear brake adjustment mechanism are documented many times on this site. Also I have seen this myself working on other 4runners. "Clean threads are coming out" :pound: :pound: :pound: Nissan do you hear yourself??? That is like asking why a seized bolt will not come out because "clean...

Replace your MAF sensor. Not clean it, replace it. If you just recently cleaned it and its already throwing a code the sensor has failed. Replace your bank 1 O2 sensor. This is the important one that the ECM uses. The bank 2 O2 sensor is not important. Muffler blew apart?! Was it made out...

So wrong. That will only work if the adjustment mechanism is clean. And pulling your ebrake when you park will not do a dag gum thing as far as adjusting the brakes. When you pull your emergency brake it pushes the pads out making contact with the drum. It also pushes a little lever up that...

I just had a local shop make mine. Just call around and ask if they make hydraulic lines. If they do, they can make what you need if you provide them with the details. I included pictures of mine. Also another member made this post awhile back...

Ok first seven things I am going to list are basic, after that it gets more involved: 1) Worth checking, was the fuel filter installed in the right direction? There is an arrow indicating correct fuel direction. 2) Check your vacuum lines. If you do not have one hooked up this could solve...

Low ball the guy and try to get him down to 1k. If he doesn't budge walk away and then talk to him 2-3 weeks later. He will probably be willing to negotiate then. Take what you need and then part it out. If you play your cards right you could probably turn a profit.

Sounds to me like either way you have a lot of maintenance coming up. I do not care how clean your 4runner looks. At the end of the day you are going to have to do the same maintenance as the guy driving a busted 4runner with 250k+ miles. And if you are comparing the cost of maintenance...

The rear brakes on 3rd 4runners suuuucccckkkkk. I am constantly having to adjust the drums. If its been awhile since you have replaced the rear brakes, replace the rear brakes. If you recently had your brakes replaced then look up how to adjust the rear drums. Really easy. If you have to...

Ram mount phone holder! I didn't come up with this idea but after trying several different type of phone holders I tried the Ram mount and never going back. You have to purchase everything separate because I could not find a kit that came with everything. But you get a ball mount that ram...

Ill double check this when I get home and send pictures for proof.