Recent content by seany

This is the aux jack part from 2006 Sienna (86190-AE010) for $20 but the aux jack for 2006 4runner (86190-53010) cost $70. Does anyone know if 4runner aux jack is any different?

ok. this is what it looks like in mine. just wondering. flip open the AUX cover to reveal the jack.

It's due to the Ground Loop caused by the source (ipod) & amplifier grounded at different ground point. You could buy a ground loop isolator from radioshack for about $15 or do some wrining work to use the same grounding point. Someone post a photo of your AUX jack?

Re: Re: ??? pin numbering is as the diagrm above as you're looking at the back of Nav you will need Speed sensor wired to have the NAV to function(navigate) properly, not to mention guidance. Definitely "ground" the Parking brake sensor. You can implement my "anytime-nav" for the...

bluemotev, Glad to see you got all working. I'm (eagerly) waiting for my steering wheel switch pads for Bluetooth for my Sienna which I'm sure it will work just fine as you already did yours. I'm also working out the details to get the Auxiliary audio input feature in 07 Solara Nav unit so I...

I only mentioned the MIC kit I purchased since it's only $50 (I believe yours is about $100) and it's genuine Toyota part. As for wire colors, RED is normally POWER, SHIELD is obvious, & the 3rd wire is for voice.

can i upload more than 1 photo in a single post? the note at the bottom is referring to the usage of the external Toyota MIC kit (with an activation button) we purchased a while ago for $50. http://www.siennaclub.org/forum/index.php?showtopic=3904

Reverse Camera Wiring

R10/R16 connectors Can anyone of you guys look up the part #'s for R10 (new long connector for MIC & CAM) & R16 (blue - used to Aux stereo input) for 4Runner or any other toyota SUV's? As I previously mentioned, the connector names like R10, R16 may differ from cars to cars. R10 on sienna, I...

That connector R14 is used by RSA (Rear Seat Audio) or RSE (Rear Seat Entertainment/DVD) or external CD changer or XM/Sirius. In the 5th Generation Navigation Unit, they removed RSA feature. So I left it unplugged in my Sienna. The Y-adaptor (or splitter) was used with the 4th Gen Nav systems...

Hello guys, bluemotev asked me visit this thread so here I am. I had installed 04 Solara Nav in my 04 Sienna (with Toyota external MIC kit w/ activation button & Eclipse Back-up CAmera which is pretty much the OEM Toyota camera) and now I have 07 Solara Nav (E7009) with fully working MIC (for...

This is for comparison.. Top : stock Sienna Camera which is mounted on the trim but through the hatch Middle : SAVV camera mounted and through the hatch Bottom : Eclipse mounted ON the hatch I didn't use the mounting bracket to mount it to save some space. Just 3M chaulking sillicone.

This is the power/control module for +12VDC input. The camera itself operates on +6VDC. You won't need to use this if you have an Eclipse headunit OR Toyota Headunit. The button is to activate the camera when not in reverse IF you're using the power/control module. 3rd socket from the left is...

size

back