Recent content by Sgtausy

I had that problem, mine was the fan clutch, the clutch was good but it had a slight wobble that made the noise. Once I replaced it it went away. Sent from my SM-G930V using Tapatalk

No ethanol I run only pure gas in my 96 with 267k miles and get average 18-20 mpg. I do drive easy on it, and even at 75-80 mph im not going over 3k rpm on level highways. Being in TN i usually take it off cruise when going uphill on the interstate and keep the RPM down. I also change my oil...

rack and pinion? I called my local dealership last week to get a quote for basically all the same things, I was told that on the 3rd gen you have to replace the rack and pinion to do the inner tie rods. Not sure if that was just them with their preventative maintenance things or it needs to be...

Make sure to do a wet application, I put it on wet and lined it up before I trimmed it. Very high quality vinyl and pleased even with the 3 weeks of wait time because they were waiting for more flat black material. They made it up by sending a free flag decal so they won me over. Going to have...

Raptor Liner, it cost 200 for paint and another 150 in materials, tape, primer and etc. I have been painting for other people too and it's a lot of fun and looks mean af. Sent from my SM-G930V using Tapatalk

Put on my overland graphics vinyl today. Very pleased Sent from my SM-G930V using Tapatalk

Replaced my transmission mount and shifter bushings, no more shaking shifter. My transmission mount was so bad I think that's what contributed to the bushings. I also put my new transmission speed sensor in but check engine light still on. Should I clear the codes and see what happens or does...

Does anyone know what percentage the factory tint is? Sent from my SM-G930V using Tapatalk

Looking for a used set of TRD rims. Really wanting black or the bronze color. If you have them and can ship them to 37046 just reply to post with cost including shipping.

have a baby If you could take the production and shop quality of Speedy and the info/specs (only said once) from timmy and make videos like that it would be great. Speedy - wish you did more time-lapse footage of you actually doing the work so I can see where things are going and so forth...

My check engine light came on the other day and went to AutoZone and when they scanned the truck it only had 1 code, Trans Speed Sensor. He printed of a page that had the AIRTEX/WELLS 5S4886 (silver and black pic below). I went onto Rockauto and ordered the part. I came in today and when I went...

Took mine off with plans to put tube ones on..... changed my mind and not putting anything back on. Sent from my SM-G930V using Tapatalk

At the fuse yes, and correct the clock and radio went out and are now working Sent from my SM-G930V using Tapatalk

Thanks for the info, however, that is pure hieroglyphics to me. I'll look it up bit could someone take a picture of the relay Sent from my SM-G930V using Tapatalk

So I drove around for a while and replaced the 15 amp Dome fuse under the hood. I now have all of my electronics back and operational. With a voltage tester I was able to see that I am not getting any power to my dome lights even with a good fuse. Is there a relay between the dome lights and the...