Recent content by ShakenBake

  1. S

    Solid Crank, Zero Start - Ideas?

    Sorry for taking so long to provide an update, it took me a few weeks to get the correct pigtail for the fuel pump. I finally replaced the fuel pump and it's running again. Thanks to everyone for helping me figure this out. I ended up going with the Denso 951-0024 fuel pump which is for the...
  2. S

    Solid Crank, Zero Start - Ideas?

    Thanks everyone for your responses and help. The replies stating that the fuel pump only runs when the engine runs was useful. I was either busy with work or too lazy to do any of the recommended testing until today and here's my update. I first checked with my OBD2 dongle and I found that...
  3. S

    Solid Crank, Zero Start - Ideas?

    I do have a code reader. What should I be looking for?
  4. S

    Solid Crank, Zero Start - Ideas?

    Update. I tried starting fluid (sprayed right into intake tube, before TB) and while it didn't get the engine running it sounded different than previous attempts. It sounded like the engine was just about to start but, as soon as the starting fluid was burned off, it would struggle and die...
  5. S

    Solid Crank, Zero Start - Ideas?

    I replaced the ECT sender, reinstalled the supercharger, and swapped the EFI and Tail relays to no avail. It's still not starting. Based on the replies, now I am troubleshooting the fuel pump. When the key is turned to accessory mode, I'm pretty sure I can hear the fuel pump priming. I...
  6. S

    Solid Crank, Zero Start - Ideas?

    This comment was intended for Vegask Also, I noticed you're in located in Reno. I just moved from PA to South Lake Tahoe, CA so you've just been promoted to my local 4Runner liaison. Congrats!
  7. S

    Solid Crank, Zero Start - Ideas?

    This is definitely on my radar as well and the fuel pump will be my next major rabbit hole if the engine coolant temp sender and/or relay do not fix it. Also, I noticed you're in located in Reno. I just moved from PA to South Lake Tahoe, CA so you've just been promoted to my local 4Runner...
  8. S

    Solid Crank, Zero Start - Ideas?

    Once I replace the engine coolant temp sender and get the supercharger reinstalled, I will swap replays and see if that changes anything, assuming the sender doesn't do the trick.
  9. S

    Solid Crank, Zero Start - Ideas?

    I ordered the OEM engine coolant temp sender, washer, and wires from my local Toyota dealer. I normally don't go through dealerships but this gives me the best chance to get every thing before the weekend. I like your fuel pump idea and I'll have to see what I have lying around to jump the...
  10. S

    Solid Crank, Zero Start - Ideas?

    Thanks for the replies! I am running a Deatschwerks 225 fuel pump. That was installed around 2020, just before I installed the supercharger. Fuel filter was also changed at this time. Since I have the supercharger removed, I will probably just replace the engine coolant temp sensor at the...
  11. S

    Solid Crank, Zero Start - Ideas?

    Looking for ideas troubleshooting what's ailing my war wagon. I have a supercharged, 5 speed, 1997 4Runner with ~235k on the clock. I've owned it for almost 13 years and it's easily the most reliable car I've owned. About 3 weeks ago, I drove to the grocery store. The 4Runner had no CEL...
  12. S

    FS: URD MAF & Timing Calibrator 3rd gen, $340 shipped, Pittsburgh, PA *SOLD*

    Brand new, unused URD Mass Air Flow Fuel & Timing Calibrator for 3rd gen 5vz-fe. Comes with split second software and I believe this is the most recent version. Pleas let me know if you have any questions.

Members online

No members online now.

Forum statistics

Threads
278,312
Messages
3,554,083
Members
248,016
Latest member
Advally Service
Back
Top